534830
56
Zoom out
Zoom in
Previous page
1/64
Next page
54
- TYPE A ONLY -
DARNING/FREE-HAND
EMBROIDERY
No. 1 Darning/Embroidery Foot
A. ATTACHING THE DARNING/
EMBROIDERY FOOT
1. Lower the feed dogs by moving the drop
feed lever to the left.
2. Remove the presser foot and holder.
3. The arm of darning/embroidery foot
should ride onto the shaft of the needle
clamp screw.
4. Slide the plastic attaching head from your
left to right so that it is fitted into the
presser bar.
5. Tighten the presser foot thumb screw.
B. DARNING
1. Place fabric under foot and lower it.
2. Grasp fabric firmly in front and back of
area to be darned. Operate machine,
moving fabric by hand forward and
backward with an even motion, stitching
in closely spaced rows over the hole or
worn area.
3. When the area is filled with new stitches,
move fabric from side to side in a similar
manner to weave or reinforce the
stitching.
a. Note:
Reinforce open areas with an underlay,
baste undelay in place before darning.
C. FREE-HAND EMBROIDERY
1. Outline the design for embroidery on the
surface of the fabric.
2. Place design to be embroidered between
the two sections of embroidery hoop.
Note:
Embroidery hoop is not included with this
machine.
3. Set embroidery hoop under needle and
lower the foot.
4. Start the machine at medium speed,
guiding hoop carefully so needle moves
along line of the pattern.
D. After darning or free-hand embroidery
Raise the feed degs by moving the drop
feed lever to the right.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Necchi 424 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Necchi 424 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info