534830
11
Zoom out
Zoom in
Previous page
1/64
Next page
9
E. THREAD CUTTER BUTTON
Press this button after sewing to cut the upper
and bobbin threads.
The machine will cut both threads
automatically.
CAUTION
1. Do not press this button when there is no
fabric in the machine or no need to cut the
threads. The thread may tangle, resulting in
damage.
2. Do not use this button when cutting thread
thicker than #30, nylon thread or other
speciality threads.
In this case, use the thread cutter (H)
F. PRESSER FOOT LIFTER
The presser foot is lifed up or down by this
lever.
Note: Machine will not start when the presser
foot is lifted. (Except for bobbin winding)
G. DROP FEED LEVER
The fabric feed dogs project up through the needle plate, directly below the presser foot.
Their function is to move the fabric being sewn. The drop feed lever controls the fabric feed
dogs.
For ordinary sewing, move the lever to the right. This raises feed dogs to their highest
position. For most sewing, the lever should be in this position.
For darning or free motion embroidery or
whenever fabric is to be moved by hand,
move the lever to the left to lower the fabric
feed dogs.
H. THREAD CUTTER
Use this cutter if the thread cutter button is
not used.
1. Raise the presser foot and bring fabric
and threads backward after sewing.
2. Hook the threads to the thread cutter from
back to front.
3. Pull fabric and cut threads.
I. TOP COVER
To open the top cover, lift up the right side
of cover.
J. HAND WHEEL
By turning the hand wheel, the needle will
raise or lower. You should turn hand wheel
toward you.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Necchi 424 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Necchi 424 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info