214406
118
Zoom out
Zoom in
Previous page
1/157
Next page
111
[LAN Mode]
Setting LAN Mode
This feature allows you to set various setting items when the projector is used on your network.
CAUTION
Consult with your network administrator about these settings.
•For wired LAN connection, use a commercially available wired LAN card and a LAN cable (Ethernet
cable). For more information on supported wired LAN cards for the NEC projectors, refer to the Service
Page for NEC Projectors (http://www.nec-pj.com).
•To use wired LAN, insert the wired LAN card into the PC Card slot.
See “Inserting and Removing a PC Card” on page 27.
•For wireless LAN connection, use the NEC optional wireless LAN card (NWL-100*).
* Last digit of the model code varies depending on which country you live in. For more information, visit
our Website.
US : http://www.necdisplay.com
Europe : http://www.nec-display-solutions.com
Global : http://www.nec-pj.com
•To use wireless LAN, insert the NEC optional wireless LAN card (NWL-100*) into the PC Card slot.
See "Inserting and Removing a PC Card” on page 27.
Always insert or remove the LAN card when the main power is turned off. Failure to do so may cause
projector malfunction or damage to the LAN card. If the projector will not work correctly, turn off the
projector, wait 90 seconds, and turn it back on.
Hints on How to Set Up LAN Connection
To configure the projector to communicate on the network using the optional wireless LAN card:
1. Select the "Profile" tab for the optional wireless LAN card.
2. On the "Profile" tab, select a number from the "Profiles" list for your LAN settings.
Two settings can be stored in memory for each the wireless LAN card respectively.
3. On the "Profile" tab, turn on or off "DHCP", specify IP address, Subnet Mask, Gateway and DNS
Configuration. Select “OK” and press the ENTER button.
See page 113.
To recall the settings from memory:
After selecting the "Profile" tab, select the number from the "Profiles" list.
Select “OK” and press the ENTER button. See page 113.
To connect a DHCP server:
On the "Profile" tab, select "DHCP" and press the ENTER button. A check mark will be placed. Select again and
press the ENTER button. The check box will be cleared.
When setting an IP address without using a DHCP server, clear the check box for "DHCP". See page 113.
To set only for wireless LAN (Network Type and WEP):
1. On the "Profile" tab, select "Profiles" and then select "Profile 1" or "Profile 2".
2. On the "Profile" tab, select "Advanced” and press the ENTER button. The "Advanced" menu will be
displayed.
See page 114.
6. Using On-Screen Menu
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec wt 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec wt 610 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info