214297

Nec wt 600 Manual

43
Zoom out
Zoom in
Previous page
1/71
Next page
6-10
Adjusting Color Temperature and White Balance
This feature adjusts the color temperature using the slide bar.
Checking "Color Temperature" enables the color temperature
slide bar and disables the “White Balance” button.
Clear “Color Temperature” and press the White Balance button
to access the Contrast/Brightness adjustment for each R, G,
and B.
NOTE: "Color Temperature" and "White Balance" are a trade-off.
The White Balance is not available for Viewer and LAN.
NOTE: When "Presentation" is selected, the available items are
"Gamma" and "White Balance" only.
Selecting Base Setting
This feature allows you to use color correction or gamma values
as reference data to optimize for various types of images. You
can select one of the following five settings.
• Presentation • sRGB • Graphic
• Video • Movie
Projector Options
Using 3D Reform
This feature corrects trapezoidal distortion so that the projected
image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save
option on Setup (See page 6-17).
1. Correcting Pincushion Distortion
If the horizontal and vertical sides bend outwards, use Pincush-
ion to correct the distortion.
[Left/Right]
Correct the left and right side on a projected image to level as
shown in the drawing.
Screen (solid line)
Projected area
(dotted line)
[Top]
Correct the top side on a projected image to level as shown in
the drawing.
Screen (solid line)
Projected area
(dotted line)
[Bottom]
Correct the bottom side on a projected image to level as shown
in the drawing.
Screen (solid line)
Projected area
(dotted line)
NOTE:
• In the [Pincushion] screen, when the [Top] adjustment value is
"0", adjustment of [Bottom] will not be possible* .
Also note that when the adjustment value of the [Top] is a small
value (on the order of +5), there will be almost no change of the
image even when the [Bottom] is adjusted*.
• In [Pincushion] screen, when the [Bottom] adjustment value is
less than “0”, a small portion can be lost at the bottom area of the
image. To display the lost portion, use the [Digital Zoom] function
to reduce the size of the projected image.*
• When [Cornerstone] or [Keystone] has already been adjusted, se-
lection of [Pincushion] will not be possible. To display [Pincush-
ion], return the adjustment values of [Cornerstone] or [Keystone]
to the factory shipping conditions.
* Each note for [Top] and [Bottom] is reversed when the [Ceiling
Rear] or [Ceiling Front] is selected in [Orientation]
Reference
• Pincushion or barrel distortion in this projector
The amount of pincushion and barrel distortion in this projec-
tor is 2% or less (TV distortion) in each of the horizontal and
vertical directions (for screen sizes of 40 inches to 100 inches).
As an example, the amount of distortion with a screen size of
60 inches (121.9 cm/48.0” W x 91.4 cm/36.0” H) is within ap-
proximately 12 mm/0.47” in the horizontal direction and within
approximately 9 mm/0.35” in the vertical direction. When this
projector is used with a 60-inch screen size, the amount of
pincushion and barrel distortion become a minimum.
6. Using On-Screen Menu
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec wt 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec wt 600 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info