215367
121
Zoom out
Zoom in
Previous page
1/150
Next page
109
6. Using On-Screen Menu
Selecting Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ..................... Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO ..................... Searches for an active source in order of COMPUTER1 COMPUTER2 HDMI VIDEO S-VIDEO
VIEWER COMPUTER1 and displays the fi rst found source.
COMPUTER1 ......... Displays the RGB source from the COMPUTER1 IN connector every time the projector is turned on.
COMPUTER2 ......... Displays the RGB source from the COMPUTER2 IN connector every time the projector is turned on.
HDMI ..................... Displays the digital source from the HDMI IN connector every time the projector is turned on.
VIDEO .................... Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER ................. Displays slides from the USB memory device every time the projector is turned on.
NETWORK ............. Displays a signal from LAN port (RJ-45).
Selecting Signal Format [SIGNAL SELECT]
COMPUTER1/2
Allows you to set [COMPUTER1] and [COMPUTER2] to automatically detect an incoming RGB or component
source such as a computer or DVD player. However there may be some RGB and component signals that the
projector is unable to detect. In this case, select [RGB].
Selecting [COLOR SYSTEM]
This feature enables you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for Video and
S-Video Connectors separately.
Setting HDMI [HDMI SETTINGS]
Make the settings for video level and audio level when connecting HDMI equipment such as a DVD player.
VIDEO LEVEL ........ Select [NORMAL] to disable the [ENHANCED] feature of your HDMI equipment. Select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
AUDIO SELECT ...... Select [HDMI] to switch the HDMI IN digital audio signal and select [COMPUTER2] to switch the COM-
PUTER2 input audio signal.
Setting MONITOR OUT Connector [OUT TERMINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT and the
AUDIO OUT connectors during Standby mode.
LAST ..................... The video and audio signal from the last COMPUTER1 or COMPUTER2 input will be output to the MON-
ITOR OUT connector.
COMPUTER1, 2 ..... The video and audio signal from the COMPUTER1 or COMPUTER2 input will be output to the MONITOR
OUT connector.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec vt800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec vt800 in the language / languages: English as an attachment in your email.

The manual is 13,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info