215367
116
Zoom out
Zoom in
Previous page
1/150
Next page
104
6. Using On-Screen Menu
To register a USB memory device as a protect key.
Preparation: Insert the USB memory device into the USB port (type A) of the projector.
1. Use the SELECT or button to select [USE PROTECT KEY] and press the ENTER button.
2. Use the SELECT or button to select [READ] and press the ENTER button.
Data of the USB memory will be read into the projector.
3. Use the SELECT or button to select [REGISTER] and press the ENTER button.
Downloaded data will be registered and be displayed in the list window.
4.
Use the SELECT or button to select [KEYWORD] and use the software keyboard to enter a keyword.
NOTE: Please make a note of your keyword.
5. Use the SELECT or button to select [OFF] and then use the SELECT or to select [ON].
6. Use the SELECT or button to select [OK] , then press the ENTER button.
The [ARE YOU SURE?] message will appear.
7. Use the SELECT or button to select [YES] and press the ENTER button.
The Security function takes effect.
To turn on the projector when Security is enabled (when using your keyword only).
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and a message to the effect that the projector is security-protected will
be displayed.
2. Press the MENU button.
The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input screen.
You can view the projected image.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code. See more information at the end of this section.
To turn on the projector when Security is enabled (when using USB memory device as a protect key).
Preparation: Insert the registered USB memory device into the USB port (type A) of the projector.
Press and hold the POWER button for a minimum of two seconds.
The projector will turn on and then recognize the USB memory device. Once the image has been projected, it will
stay on without the USB memory device.
The projector does not support NTFS formatted USB memory device.
Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT  le system.
To format your USB memory device in your computer, refer to the document or help  le that comes with your
Windows.
We do not warrant that the USB port of the projector will support all USB memory devices in the market.
When the projector is turned on, if the registered USB memory device is not inserted into the projector, no
signal will be displayed with a message to the effect that the projector is security-protected. To turn off the
security protection, insert the registered USB memory device into the projector.
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec vt800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec vt800 in the language / languages: English as an attachment in your email.

The manual is 13,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info