488898
47
Zoom out
Zoom in
Previous page
1/54
Next page
E39
Cleaning or Replacing the Filters
The air-filter sponge keeps the inside of the VT45 Projector free
from dust or dirt and should be cleaned after every 100 hours of
operation (more often in dusty conditions). If the filter is dirty or
clogged, your projector may overheat.
CAUTION
Turn off the power and unplug the projector before
replacing the filter.
Only clean the outside of the filter cover with a
vacuum cleaner.
Do not attempt to operate the projector without a
filter cover.
Your projector will not operate unless the filter cover
is installed correctly.
To clean the air-filter:
When Clean Filter option is turned on, the Please clean the
filters message will be displayed each time the projector is turned
on after it has been used in excess of 100 hours. Should this
message appear, clean the filters.
The message can be turned on or off using the Menu - Fil-
ter Clean Message option on the Setup menu. See page E-
35.
After cleaning the filters and resetting the filter usage time
back to zero, the message will not be displayed.
See page E-37 for resetting the filter usage time.
Vacuum the filter-through the filter cover.
To replace the air-filter:
1. Remove the filter cover by pushing up on the catch of the
cover until you feel it detach.
2. Reinstall the new filter cover.
NOTE: Do not detach the sponge from the filter cover. Do not
wash the filter cover with soap and water. Soap and water will
damage the the filter membrane. Before replacing the filter cover,
remove dust and dirt from the projector cabinet. Keep out dust
and during filter replacement.
NOTE: When you replace the lamp, it is also wise to replace the
filters. The filters come in the same package with your replace-
ment lamp.
NOTE: A mix-up between the two filter covers can cause a dam-
age to the projector.
The rear and the side filter covers appear to be the same shape,
but they are not interchangeable with each other.
SOURCE
E
M
N
U
C
N
A
C
E
L
T
E
R
N
E
SELECT
AUTO ADJUST
ON
STAN
D BY
STATU
S
POWER
S
OU
RC
E
E
M
N
U
C
N
A
C
E
L
T
E
R
N
E
SELECT
AUTO AD
JU
ST
ON
S
T
AND
B
Y
ST
ATU
S
POW
ER
SOU
RCE
E
M
N
U
C
N
A
C
E
L
T
E
R
N
E
SELECT
A
U
TO
A
D
JU
S
T
O
N
S
T
A
N
D
B
Y
S
T
A
T
U
S
P
O
W
E
R
5. After you install a new lamp, select [Advanced Menu]
[Projector Options][Setup][Page 4][Clear Lamp Hour
Meter] to reset the lamp usage hours.
NOTE: When the lamp exceeds 1100 hours (up to 2100 hours in
Eco 2 mode and up to 1600 hours in Eco 1 mode) of service, the
projector cannot turn on and the menu is not displayed. If this
happens, press the Help button on the remote control for a mini-
mum of 10 seconds while in standby mode. When the lamp time
clock is reset to zero, the STATUS indicator goes out.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec VT45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec VT45 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info