488898
33
Zoom out
Zoom in
Previous page
1/54
Next page
E25
3.OPERATION
This section describes how to select a computer or video source,
how to adjust the picture, and how to customize the menu or projec-
tor settings.
General Controls
Before you turn on your projector, ensure that the computer or video
source is turned on and that your lens cap is removed.
1. Turn on the Projector
Plug the supplied power cable in the wall outlet and then press the
main power switch. The projector will go into its standby mode and
the power indicator will glow orange.
Only after you press the POWER button on the projector cabinet
or the remote control will the power indicator turn to green and the
projector become ready to use.
Indicator status when the projector is turned on:
CAUTION
Avoid displaying stationary images for a prolonged period
of time.
Doing so can result in these images being temporarily sus-
tained on the surface of the LCD panel.
If this should happen, continue to use your projector. The
static background from previous images will disappear.
The STATUS indiator light depends on the lamp mode.
NOTE: To turn the projector on by pressing the main power switch,
use the menu and enable the Auto Start feature. (See page E-36.)
NOTE: Immediately after turning on the projector, screen flicker
may occur. This is not a fault. Wait for 3 to 5 minutes until the lamp
lighting is stabilized.
2. Select the Computer or Video Source
Press the Source button on the remote control or the projector cabi-
net to select Video (VCR, document camera, or laser disc player),
S-Video or RGB (computer or DVD with component output) to
display the image.
Or press the Menu button on the remote control or the cabinet and
use the menu to select your video source: Video, S-Video or
RGB.
3. Adjust the Lens Shift, the Image Size and the Focus
Use the Lens Shift lever to adjust the image position.
Use the Zoom lever to adjust the image size, then use the Focus ring
to obtain the best focus.
Use the Magnify button (+) or (-) on the remote control to make
the image larger up to 400%.
4. Turning off the Projector
First press the POWER button on the projector cabinet or the re-
mote control for a minimum of two seconds. The power indicator
will glow orange. After the projector turns off, the cooling fans keep
operating for 60 seconds.
Do not disconnect the power cable during this time. Then, press the
main power switch and unplug the power cable. The power indica-
tor will go out.
Indicator status when the projector is turned off:
<
POWER ON
>
/
<
ON
/
STAND BY
>
POWER
STATUS
POWER
POWER
Standby
Steady orange light
Flashing green
light for one minute Steady green light
IMPORTANT:
The projector should be unplugged if it will not to be used for an
extended period.
To turn off the image and sound briefly (five minutes or less), use
the Mute button instead of turning the projector off and on.
The projector will display a black, blue image or logo if no input
signal is present.
Do not turn the projector off and then immediately back on. The
projector needs to cool for 60 seconds before it can be restarted.
<
POWER OFF
>
/
<
ON
/
STAND BY
>
POWER
STATUS
POWER
STATUS
Press
for a
minimum of
2 s
econds
Cooling fan running
Flashing green light
Steady orange light
Standby(cooling fan
has stopped running)
CAUTION
Do not turn off the main power or unplug the power cable
from the wall outlet under any one of the following circum-
stances. Doing so can cause damage to the projector:
Immediately after the power cable is plugged into the wall
outlet (when the POWER indicator has not changed to a
steady orange glow).
Immediately after the cooling fan stops working (The cool-
ing fan continues to work for 60 seconds after the pro-
jector is turned off with the POWER button).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec VT45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec VT45 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info