214294
69
Zoom out
Zoom in
Previous page
1/126
Next page
69
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
Equipment Connections and Settings
When Making Connections with Serial Cable
What Can Be Accomplished
Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then projected to a screen.
• Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the per-
sonal computer which include switching the projector power on/off, signal selection, and adjustment of the picture
quality.
[For Connections with Serial Cable]
Equipment to Be Prepared
Projector (This unit)
•Personal computer
Serial cable not included with the projector (Optional CA03D is available)
Connection at the Projector Side
Plug the serial cable into the PC CONTROL connector. (“Terminal Panel Features” and “PC Control Connector” on
pages 16 and 121)
Connection at the Personal Computer Side
Plug the serial cable into the (RS-232C) serial connector.
Software Installation
NOTE
Windows XP operations will be described in examples given here.
When using Windows 2000, please perform software installation/uninstalling with "Administrators" authority. When using Win-
dows XP, perform with "Computer Administrator" authority.
Dynamic Image Utility 2.0 Installation
Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be installed together. The various programs cannot be
installed individually.
Preparation:
Start Windows.
If Windows has already been started, please exit all running application software. The installation may not be com-
pleted properly unless all software has been exited.
1.Place the supplied CD-ROM in the CD-ROM drive.
The "Startup" screen will appear.
Reference
Should the "Startup" screen not appear...
1) Click [Start].
2) Click [Run (R)]. The [Run] screen will appear.
3) Enter the CD-ROM drive name (e.g., "Q: \") and then "SETUP.EXE" to [Open (O)].
4) Click [OK]. The "Startup" screen will appear.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec vt 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec vt 770 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info