214639
55
Zoom out
Zoom in
Previous page
1/79
Next page
47
5. Using On-Screen Menu
Enabling Fan Speed Mode [Fan Mode]
This option allows you to select two modes for fan speed: Auto mode and High speed mode.
Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature.
High ...................... The built-in fans run at a fixed high speed.
When you wish to cool down the temperature inside the projector quickly, select [High].
NOTE: It is recommended that you select High speed mode if you continue to use the projector for consecutive days.
Selecting Default Source [Default Source Select]
You can set the projector to default to any one of its inputs each time the projector is turned on.
Last ....................... Sets the projector to default to the previous or last active input each time the projector is turned on.
Auto ...................... Searches for an active source in order of Computer 1 Computer 2 (Digital) Computer 2 (Analog)
Video S-Video Computer 1 and displays the first found source.
NOTE The VT491 will search for an active source in order of Computer 1 Computer 2 Video S-Video
Computer 1 and displays the first found source.
NOTE The VT590, VT59 and VT49 will search for an active source in order of Computer Video S-Video
Computer and displays the first found source.
Computer 1 ........... Displays the RGB source from the COMPUTER 1 IN connector every time the projector is started up. (VT695/
VT595/VT491 only)
Computer 2 (Digital) ...
Displays the DVI digital source from the COMPUTER 2 IN connector every time the projector is started up.
(VT695/VT595 only)
Computer 2 (Analog) ..
Displays the RGB source from the COMPUTER 2 IN connector every time the projector is started up. (VT695/
VT595 only)
Computer 2 ........... Displays the RGB source from the COMPUTER 2 IN connector every time the projector is started up. (VT491 only)
Computer .............. Displays the RGB source from the COMPUTER IN connector every time the projector is started up. (VT590/
VT59/VT49 only)
Video ..................... Displays the Video source from the VIDEO IN connector every time the projector is started up.
S-Video ................. Displays the Video source from the S-VIDEO IN connector every time the projector is started up.
Selecting Signal Format [Signal Select]
[Computer]
*1
,[Computer 1],[Computer 2 (Analog)],[Computer 2]
*2
Allows you to choose [Computer]
*1
, [Computer 1], [Computer 2 (Analog)], or [Computer 2]
*2
for an RGB source such as
a computer, or [Component] for a component video source such as a DVD player. Normally select [RGB/Component]
and the projector automatically detects a component signal. However there may be some component signals that the
projector is unable to detect. If this is the case, select [Component].
*1 [Computer]: VT590, VT59 and VT49 only
*2 [Computer 2]: VT491 only
[Video & S-Video System Select]
This feature enables you to select composite video standards automatically or manually.
Normally select [Auto] and the projector will automatically detect the video standard.
In the case where the projector has difficulty detecting the video standard, select the appropriate video standard from
the menu.
This must be done for Video and S-Video respectively.
Enabling the deinterlace [Deinterlace]
Turns on or off the deinterlace function for a telecine signal.
On ......................... Default standard setting.
Off ......................... Select this option if there is any jitter or artifacts in video.
NOTE: This feature is not available for RGB, 480p, 576p and HDTV signals.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec vt 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec vt 49 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec vt 49

Nec vt 49 User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info