537855
80
Zoom out
Zoom in
Previous page
1/106
Next page
70
5. Using On-Screen Menu
[OPTIONS(1)]
Selecting Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO ..................... The built-in fans automatically run at a variable speed according to the internal temperature.
HIGH
...................... The built-in fans run at high speed.
HIGH ALTITUDE
..... The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately
3000 feet/900 meters or higher.
NOTE:
When you wish to cool down the temperature inside the projector quickly, select [HIGH].
It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
If you use the projector at altitudes approximately 3000 feet/900 meters or higher, you are recommended to set [FAN MODE] to
[HIGH ALTITUDE]. Failure to do so may cause the projector to overheat , resulting in malfunction.
High altitude
12000 ft (3600 m)
to
8500 ft (2600 m)
[HIGH ALTITUDE] for [FAN MODE]
5° to 30°C
(ECO MODE ON only)
8500 ft (2600 m)
to
3000 ft (900 m)
[HIGH ALTITUDE] for [FAN MODE]
5° to 35°C
3000 ft (900 m)
to
0
[AUTO] for [FAN MODE]
5° to 40°C
Using the projector at altitudes approximately 3000 feet/900 meters or higher without setting to [HIGH ALTITUDE] can cause the
projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
Using the projector at altitudes less than approximately 3000 feet/900 meters and setting to [HIGH ALTITUDE] can cause the lamp
to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
Using the projector at high altitudes or in low air pressure can shorten the life of components.
Your setting will not be affected even when [RESET] is done from the menu.
Selecting [COLOR SYSTEM]
This feature enables you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for VIDEO and S-
VIDEO Connectors separately.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to a WXGA (1280 × 768) signal in recognizing an input signal.
When [WXGA MODE] is set to [ON], an XGA (1024 × 768) signal may not be recognized on V311X. In this case,
select [OFF].
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec V311W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec V311W in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec V311W

Nec V311W Quick start guide - English - 6 pages

Nec V311W User Manual - Portuguese - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info