654058
57
Zoom out
Zoom in
Previous page
1/74
Next page
49
3. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheel-
ing condition.
The two screws are not removable.
Remove the lamp housing by holding the handle.
6. Maintenance
Interlock
NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.
Fig. A Fig. B Fig. C
Note: Removing or Inserting the Lamp (Sticking of Packing Ring)
After lamp replacement, a black packing ring may be stuck inside the projector (Fig. A and Fig. B).
If this happens, do the following:
If the used packing ring does not remain inside the projector (Fig. C), proceed with the new lamp housing installation.
• If the used packing ring is stuck inside the projector (Fig. B), remove it from inside the projector before installing the new lamp
housing. To remove the packing ring, simply pull it off of the stud.
* In other cases where the lamp is removed (other than lamp replacement), pulling out the lamp housing may also cause the
packing ring to stay stuck inside the projector. If this happens, make sure to insert the lamp housing back in its original position.
CAUTION
Before removing the used packing ring, be sure to turn off the projector, wait for the cooling fan to stop, disconnect the power
cable, and allow at least one hour for the lamp to cool.
The projector can become very hot when it is turned on and stay hot immediately after it is turned off.
Do not install a new lamp with the used packing ring stuck inside the projector as it requires excessive force to install the new
lamp which then may cause damage to the projector.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec NP40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec NP40G in the language / languages: English as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec NP40G

Nec NP40G User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info