215920
140
Zoom out
Zoom in
Previous page
1/183
Next page
126
6. Using On-Screen Menu
[OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise
and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF ........................ The RGB image will not be automatically adjusted.
You can manually optimize the RGB image.
NORMAL ................ Default setting. The RGB image will be automatically adjusted. Normally select this option.
FINE ....................... Select this option if fine adjustment is needed. It takes more time to switch to the source than when
[NORMAL] is selected.
Enabling Auto Power On [AUTO POWER ON (AC)]
Turns the projector on automatically when the power cable is inserted into an active power outlet and the main pow-
er switch is turned on. This eliminates the need to always use the POWER (ON/STANDBY) button on the remote
control or projector cabinet.
To use the AUTO POWER ON (AC) function, you must first press the main power switch to the position “On” before
plugging in the power cable.
Turning On the Projector By Applying RGB Signal [AUTO POWER ON(COMP1/2)]
When the projector is in standby condition, applying an RGB signal from a computer connected to the COMPUTER
1 IN or the COMPUTER 2 IN connector will power on the projector and simultaneously project the computer’s im-
age.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabi-
net to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
OFF ........................ This feature is disabled.
COMPUTER 1 ........ Applying an RGB signal from a computer connected to the COMPUTER 1 IN input will power on the pro-
jector and simultaneously project the computer’s image.
COMPUTER 2 ........ Applying an RGB signal from a computer connected to the COMPUTER 2 IN input will power on the pro-
jector and simultaneously project the computer’s image.
NOTE:
Disconnecting an RGB signal from the computer will not power off the projector. We recommend using this function in combi-
nation of the AUTO POWER OFF function.
This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER 1 or 2 IN connector
- when a Sync on Green RGB signal or composite sync signal is applied
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec np3250w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec np3250w in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec np3250w

Nec np3250w User Manual - German - 183 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info