493591
24
Zoom out
Zoom in
Previous page
1/115
Next page
13
COMPUTER1IN
COMPUTER2IN
PHONE
2. Installation and Connections
Making Connections
Connecting Your PC or Macintosh Computer
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage-
ment software.
Enablingthecomputer’sexternaldisplay
DisplayinganimageonthenotebookPC’sscreendoesnotnecessarilymeanitoutputsasignaltotheprojector.
WhenusingaPCcompatiblelaptop,acombinationoffunctionkeyswillenable/disabletheexternaldisplay.
Usually,thecombinationofthe“Fn”keyalongwithoneofthe12functionkeysgetstheexternaldisplaytocomeon
oroff.Forexample,NEClaptopsuseFn+F3,whileDelllaptopsuseFn+F8keycombinationstotogglethrough
externaldisplayselections.
IBMVGAorCompatibles(Notebook
type)orMacintosh(Notebooktype)
NOTE: For older Macintosh, use a commercially
available pin adapter (not supplied) to connect to
your Mac’s video port.
• Firstturnoffthecomputerandtheprojectorbeforemakingconnections.
• Turndownthevolumeonthecomputerbeforeconnectinganaudiocabletotheheadphonejackofthecom-
puter.Afterconnectingthecomputertotheprojector,youcanadjustthesoundlevelonthecomputerandthe
projectortoyourpreference.
• Youarerecommendedtoconnectanaudiocabletoanaudiooutconnector(minijacktype)ifany.
NOTE: The NP3200/NP2200/NP1200 is not compatible with video decoded outputs of either the NEC ISS-6020 and ISS-6010
switchers.
NOTE:
An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on
the projector cabinet.
Stereomini-plugaudiocable(notsupplied)
VGAsignalcable(supplied)
TominiD-Sub15-pinconnectorontheprojector.
Itisrecommendedthatyouuseacommercially
availabledistributionamplierifconnectinga
signalcablelongerthantheonesupplied.
Stereo
mini-plug
audio
cable (not
supplied)
BNC×5cable(notsupplied)
NOTE: Both COMPUTER 1 IN and
COMPUTER 3 (DVI-D) IN connectors
support Plug & Play (DDC2B).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec NP3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec NP3200 in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec NP3200

Nec NP3200 Quick start guide - English, German - 6 pages

Nec NP3200 User Manual - German - 115 pages

Nec NP3200 Quick start guide - Dutch, Danish - 6 pages

Nec NP3200 Quick start guide - French - 6 pages

Nec NP3200 User Manual - French - 115 pages

Nec NP3200 Quick start guide - Italian - 6 pages

Nec NP3200 User Manual - Italian - 115 pages

Nec NP3200 Quick start guide - Polish - 6 pages

Nec NP3200 Quick start guide - Portuguese, Swedish - 6 pages

Nec NP3200 User Manual - Swedish - 115 pages

Nec NP3200 Quick start guide - Turkish - 6 pages

Nec NP3200 Quick start guide - Spanish - 6 pages

Nec NP3200 User Manual - Spanish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info