215365
132
Zoom out
Zoom in
Previous page
1/172
Next page
118
6. Using On-Screen Menu
[OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise
and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF
........................ The RGB image will not be automatically adjusted.
You can manually optimize the RGB image.
NORMAL
................ Default setting. The RGB image will be automatically adjusted. Normally select this option.
FINE
.......................Select this option if fine adjustment is needed. It takes more time to switch to the source than when
[NORMAL] is selected.
Enabling Auto Power On [AUTO POWER ON (AC)]
Turns the projector on automatically when the power cable is inserted into an active power outlet and the main pow-
er switch is turned on. This eliminates the need to always use the POWER (ON/STANDBY) button on the remote
control or projector cabinet.
To use the AUTO POWER ON (AC) function, you must first press the main power switch to the position “On” before
plugging in the power cable.
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min.,
10min., 20min., 30min.) if there is no signal received by any input.
Enabling High Speed Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO
..................... The built-in fans automatically run at a variable speed according to the internal temperature.
HIGH
...................... The built-in fans run at high speed.
HIGH ALTITUDE
..... The built-in fans run at a high speed. Select this option when using the projector at altitudes approximate-
ly 5500 feet/1600 meters or higher.
When you wish to cool down the temperature inside the projector quickly, select [HIGH].
NOTE:
It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause
the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the
lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
Your setting will not be affected even when [RESET] is done from the menu.
132


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec np3151w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec np3151w in the language / languages: English as an attachment in your email.

The manual is 17,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec np3151w

Nec np3151w User Manual - German - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info