654085
73
Zoom out
Zoom in
Previous page
1/97
Next page
64
5. Using On-Screen Menu
TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP.)/[AUTOPOWER
ON(COMP1)]forNP216]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input (COMPUTER 1 IN on NP216) will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-
binationoftheAUTOPOWEROFFfunction.
• Thisfunctionwillnotbeavailableunderthefollowingconditions:
- whenacomponentsignalisappliedtotheCOMPUTERIN(COMPUTER1INonNP216)connector
- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied
• ToenabletheAUTOPOWERON(COMP.)/AUTOPOWERON(COMP1)afterturningofftheprojector,wait3secondsandinputa
computer signal.
Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)/AUTOPOWERON(COMP1)
will not work and the projector remains in standby mode.
EnablingPowerManagement[AUTOPOWEROFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min., 30min.) if there is no signal received by any input or if no operation is performed.
SelectingDefaultSource[DEFAULTSOURCESELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ................................... Sets the projector to default to the previous or last active input each time the projector is turned
on.
AUTO
..................................Searches for an active source in order of COMPUTER VIDEO S-VIDEO COMPUTER (COM-
PUTER 1 COMPUTER 2 on NP216) and displays the first found source.
COMPUTER
........................Displays the computer signal from the COMPUTER IN connector every time the projector is turned
on.
COMPUTER 1
(NP216 only)
......................Displays the computer signal from the COMPUTER 1 IN connector every time the projector is turned
on.
COMPUTER 2
(NP216 only)
......................Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned
on.
VIDEO
.................................Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO
.............................Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
SelectingPortforExternalEquipment[CONTROLTERMINAL](NP216/NP215only)
This option allows you to select a port for controlling the projector either from PC Control or over a LAN.
PC CONTROL ......... Select for controlling the projector from external equipment connected to the PC CONTROL port (D-Sub 9
Pin).
LAN
........................ Select for controlling the projector from external equipment connected to the LAN port (RJ-45).
NOTE:
- When[POWER-SAVING]isselectedfor[STANDBYMODE],controllingtheprojectorfromexternalequipmentisnotpossible.
- ThePCControlportandLANportarenotactiveatthesametime.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec NP110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec NP110 in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec NP110

Nec NP110 User Manual - German - 97 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info