216082
56
Zoom out
Zoom in
Previous page
1/65
Next page
E-56
Does not turn on
No picture
Image isn’t square to the
screen
Picture is blurred
Image is scrolling verti-
cally, horizontally or
both
Remote control does
not work
Indicator is lit or blink-
ing
Cross color in RGB
mode
USB mouse does not
work
Check that the power cable is plugged in and that the power button on the projector cabinet or the remote
control is on. See pages E-17 and 18.
Ensure that the lamp cover or lamp housing is installed correctly. See page E-53.
Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is
insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move
the projector to a cooler location.
Use the menu to select your source (RGB 1/2, Video, S-Video, DVI, Viewer or LAN). See page E-19.
Ensure your cables are connected properly.
Use menus to adjust the brightness and contrast. See page E-38.
Remove the lens cap.
Reset the settings or adjustments to factory preset levels using the Factory Default in the Adjustment Menu.
See page E-52.
Reposition the projector to improve its angle to the screen. See page E-19.
Use the 3DReform function to correct the trapezoid distortion. See page E-20.
Adjust the focus. See page E-20.
Reposition the projector to improve its angle to the screen. See page E-19.
Ensure that the distance between the projector and screen is within the adjustment range of the lens. See page
E-12 and 13.
Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on.
Should this happen, let the projector stand until there is no condensation on the lens.
Use menus or Source button on the remote control or the cabinet to select the source you want to input.
Install new batteries. See page E-11.
Make sure there are no obstacles between you and the projector.
Stand within 22 feet (7 m) of the projector. See page E-11.
Make sure that you are in the Projector mode and the PJ button lights in red. If not, press the PJ button. See
page E-24.
See the Status Indicator on pages E-55.
If Auto Adjust is off, turn it on or adjust the image manually with the Position/Clock in the Image Options. See
pages E-39 and 45.
Make sure that your USB mouse is properly connected to the projector.
The projector may not support some brands of a USB mouse.
Problem Check These Items
Common Problems & Solutions
When using the Viewer function
Is “Viewer” selected from the Source menu?
Is the PC card seated in the PC Crad slot completely?
Are slide data stored in the PC card?
Have the contents of the PC card been destroyed?
While an image with over 1024ן768 dots is projected, several lines of information will be lost. Use
the supplied software change the image to 1024ן768 dots in size.
Use a computer, etc., to repair the data.
Problem Check These Items
For more information contact your dealer.
No picture
Part of a slide is not displayed
Contents of PC Card are damaged
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec mt1065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec mt1065 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec mt1065

Nec mt1065 User Manual - German - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info