493587
5
Zoom out
Zoom in
Previous page
1/56
Next page
E 5
1. INTRODUCTION
Introduction to the MultiSync MT1055/MT1050/
MT850 Projector
This section introduces you to your new MultiSync MT1055 and MT1050
(XGA)/ MT850 (SVGA) Projector and describes the features and con-
trols.
Congratulations on Your Purchase of The
MultiSync MT1055/MT1050/MT850 Projector
The MultiSync MT1055/MT1050/MT850 is one of the very best projec-
tors available today. The MultiSync MT1055/MT1050/MT850 enables
you to project precise images up to 300 inches across (measured di-
agonally) from your PC or Macintosh computer (desktop or notebook),
VCR, DVD player, document camera, a laser disc player or PC Card
Viewer.
You can use the projector on a tabletop or cart, you can use the projec-
tor to project images from behind the screen, and the projector can be
permanently mounted on a ceiling*
1
. The remote control can be used
wirelessly.
Features you’ll enjoy:
Simple set up and operation.
Hot air blown from the vents does not bother the audience during
your presentation since the vents are located at the front of the pro-
jector.
A high-performance 200 watt NSH lamp.
The supplied wireless remote control that operates the projector from
any angle.
The image can be projected between 30 and 300 inches (measured
diagonally).
Keystone correction allows you to correct trapezoidal distortion so
that the image is square.
You can choose between video modes depending on your source:
"normal" for a typical picture, "natural" for true color reproduction.
The built-in PC Card Viewer allows you to start your presentation
even when a PC is not available at the site.
The "Capture" enables you to capture the current projected image.
An image can be projected from in front or behind a screen, and the
projector can even be installed on the ceiling.
NEC Technologies exclusive Advanced AccuBlend intelligent pixel
blending technology - an extremely accurate image compression
technology - offers a crisp image with UXGA (1600ן1200) resolu-
tion*
3
.
Supports most IBM VGA, SVGA, XGA*
2
, SXGA/UXGA(with Ad-
vanced AccuBlend)*
3
, Macintosh, component signal (YCbCr / YPbPr)
or any other RGB signals within a horizontal frequency range of 15
to 100 kHz and a vertical frequency range of 50 to 120 Hz. This
includes NTSC, PAL, PAL60, SECAM and NTSC4.43 standard video
signals.
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
The supplied remote control can be used without a cable, and you
can even use the remote control and mouse adapter to operate your
PC or Macintosh mouse wirelessly from across the room with the
built-in remote mouse receiver.
You can control the projector with a PC using the PC Control port*
4
.
USB terminal allows USB mouse operation *
5
.
The contemporary cabinet design is light, compact, easy to carry,
and complements any office, boardroom or auditorium.
Eight pointers are available for your presentation.
*
1
Do not attempt to mount the projector on a ceiling yourself. The pro-
jector must be installed by qualified technicians in order to ensure
proper operation and reduce the risk of bodily injury. In addition, the
ceiling must be strong enough to support the projector and the in-
stallation must be in accordance with any local building codes. Please
consult your dealer for more information.
*
2
An XGA image (1024ן768) is converted into an 800ן600 crisp
image with NEC technologys Advanced AccuBlend on MT850.
*
3
A UXGA (1600ן1200) and SXGA image (1280ן1024) are displayed
with NEC technologys Advanced AccuBlend on MT1055/MT1050.
*
4
The PC Control Utility 1.0 is required. This program is included on
the supplied CD-ROM.
*
5
The USB terminal meets the USB1.1 specification and accepts a
USB mouse only.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Take a few minutes now to review the users manual.
This may save you time later on. At the beginning of each section of
the manual youll find an overview. If the section doesnt apply, you can
skip it.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec MT1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec MT1050 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec MT1050

Nec MT1050 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info