Manual Nec mt 860 (page 51 of 65) (English)

214296

Zoom out

Zoom in

1/65

E-51

Enable/Disable .............. This turns the Security function on or off.

Keyword ........................ Enter an appropriate keyword when you use

the Security function.

(Up to 10 characters can be used.)

The Security function is available only when

your keyword is entered.

Use Protect key ............ Check this box to lock your projector when

using a PC card. To use a keyword without

a PC card, do not check this box.

Drive ............................. Switches between PC Card slot 1 and 2.

Read ............................. Reads data of a PC card.

The Security function is not available unless

at least one PC card is registered. (if the

“Use Protect key” check box is selected)

Up to 5 PC cards can be registered.

Delete ........................... Deletes data of a registered PC card.

To set up a keyword to enable the Security function without using

a registered PC card.

1. Use the SELECT

̆̄

button to select “Keyword” and use the soft-

ware keyboard to enter a keyword.

NOTE: Please make a note of your keyword.

2. Use the SELECT

̆̄

button to select “Enable” and use the SELECT

̆̄

button to select “OK”, then the Security function will be enabled.

An “Are you sure?” message will appear. Use the SELECT

̇̈

but-

ton and press the ENTER button.

The Security function takes effect.

To register a PC card as a protect key.

1. Insert a PC card into the PC card slot of the projector.

2. Use the SELECT

̆̄

button to select "Read" and press the ENTER

button.

Data of the PC card will be read into the projector.

3. Use the SELECT

̆̄

button to select "Register" and press the EN-

TER button.

Downloaded data will be registered and be displayed in the list win-

dow.

Security

The Security function enables you to protect your projector so that the

projector will not project a signal unless you enter a keyword. There is

also an option to lock the projector by using a registered PC card as a

protect key. Once you have registered your PC card as a protect key,

you are required to insert the registered PC card into the PC card slot of

the projector each time you turn on the projector. You can enable the

Security function by using a keyword only.

4. Use the SELECT

̆̄

button to select "Keyword" and use the soft-

ware keyboard to enter a keyword.

NOTE: To use a PC card as a protect key, you must also set up a keyword.

Please make a note of your keyword.

This completes registration of your PC card.

To enable Security, use the SELECT ̆̄ button to select "Enable" and

use the SELECT ̆̄ button to select "OK" and "Security function will

be enabled. An “Are you sure?" message will appear. Use the SELECT

̇̈ button and press the ENTER button.

The Security function takes effect.

To turn on the projector when Security is enabled (when using your

keyword only).

1. Press and hold the POWER button for a minimum of two seconds.

The projector will be turned on and display a message to the effect

that the projector is security-protected.

2. Select [Projector Options]

→

[Security] from the menu and press the

ENTER button.

The Release Code input screen will be displayed.

3. Enter your keyword in the Release Code input screen.

You can view the projected image.

NOTE: Do not forget your keyword. However, if you forget your keyword, NEC

or your dealer will provide you with your Release Code. See more information

at the end of this section.

To turn on the projector when Security is enabled (when using a

PC card as a protect key).

1. Insert your registered PC card into the PC card slot.

2. Press and hold the POWER button for a minimum of two seconds.

The projector will turn on and then recognize the PC card. Once the

image has been projected, it will stay on without the PC card.

• The security disable mode is maintained until the main power is turned

off (by setting the main power switch to "O" or unplugging the power

cord).

In the following cases you will be asked to check the protect key or

input the keyword:

(1) When "OK" is selected at an image for which security is set and

the power is turned off then back on

(2) When the main power is turned off then back on while the secu-

rity function is enabled

(3) When you attempt to display an image for which security is set

while the security function is enabled

• Blanks (spaces) cannot be used in the Keyword section.

To delete PC card data you registered.

1. Use the SELECT

̆̄

button to select "Delete" and use the SELECT

button to select the list window.

2. Use the SELECT

̆̄

button to select the PC card data you wish to

delete.

3. Press the SELECT

button to select "Delete" and press the ENTER

button.

The PC card data will be deleted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nec mt 860 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec mt 860

Nec mt 860 User Manual - German - 65 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nec mt 860 Manual

Product: