539933
18
Zoom out
Zoom in
Previous page
1/21
Next page
English-15
English
Advanced OSD Controls without video input
If no video signal is available, the display enters the power save mode and the OSD cannot be displayed.
In this case, please follow the procedure below.
1. Confi rm that the display is in power save mode and the LED next to the power switch is lit orange. If the LED is off, please
push the power switch to turn on the monitor.
2. Hold down the (+) plus button and the (-) minus button simultaneously for over 2 seconds.
The “INFORMATION” OSD menu opens on the screen. The LED color changes from Orange to Green.
3. Switch EDID, Display Mode or Confi guration referring to this manual.
How to Change the EDID settings (see page 12)
How to Change the Display Mode (see page 13)
How to Change Confi guration (see page 14)
4. If the display enters the power save mode during the change process, please start from the beginning again.
Attaching a wall mount or multi-display mounting arm
The tilt and swivel stand, as shipped with the display, is interchangeable with commercially available wall mounts or multi-display
mounting arms that:
Come with a mount plate with 4 slotted screw holes at 100 mm x 100 mm and
Can bear the total weight of the LCD panel (without the stand) and the cables connected to it.
For more information ask your mounting arm supplier.
Note: Use the original screws to use the LCD panel back on its original tilt stand.
Choose the screw size carefully according to the mount plate thickness.
If the screws are too long, they could damage the internal parts. If they are
too short, the connection becomes loose and the display could fall out.
Mounting plate thickness Screw size
1.5-4.0mm ISO M4x16
CAUTION
How to attach wall mounts or multi-display mounting arms
1. Place a soft cloth or cushioning material over a stable even surface.
2. Put the display face down on the soft cloth or cushioning material.
3. Remove 4 screws and detach the tilt and swivel stand shipped with the display.
4. Attach the wall mount or multi-display mounting arm according to the
manufacturers instructions.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec MD215MG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec MD215MG in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info