539933
14
Zoom out
Zoom in
Previous page
1/21
Next page
English-11
English
Specifi cations
Monitor Specifi cations MD215MG Notes
LCD panel color Clear Base
LCD 21.3-inch (54 cm), monochrome, TFT active matrix, anti-glare
Pixel pitch (H x V) 0.165 x 0.165 mm
Display area (H x V) 337.9 x 422.4 mm
Pixel (H x V) 2048 x 2560
Grayscale 256 steps of gray out of a palette of 3826
10-bit (1024) simultaneously displayable grayscale in packed pixel mode
Backlight 12 cold cathode fl uorescent lamps (CCFL)
LCD Optical characteristics (typ.) Viewing angle: 170° horizontal/vertical (contrast ratio 20:1)
Contrast ratio: 850:1 (Viewing angle perpendicular to LCD panel)
Luminance DICOM calibrated 400 cd/m
2
as factory default
Maximum 500 cd/m
2
(1100 cd/m
2
typ. as LCD component)
Input sync signal DVI 1.0 compliant
Available resolution 640 x 480
800 x 600
1024 x 768
2048 x 2560 (at Fv=25/50Hz)
2560 x 2048 (at Fv=25/50Hz)
Input connectors DVI 24-pin connector, 6-pin DC power input terminal
USB Hub USB Rev. 2.0 compliant, Self-powered
USB upstream port (x1), USB downstream ports (x2)
Ambient conditions Temperature:
Humidity (no condensation):
Air pressure:
On: 5 ~ 40°C, Off: -20 ~ 60°C
On: 30 ~ 80%, Off: 10 ~ 85%
On: 700 ~ 1060hPa, Off: 266 ~ 1060hPa
Power Display:
AC Adapter MW122:
DC 12V, 10A
Input: AC 100 to 240V, 50/60 Hz, 2A
Output: DC 12V, 10A
Power consumption Normal:
Power saved:
Approx. 90W (w/ supplied AC adapter)
Less than 10W (w/ supplied AC adapter)
Dimensions & weight Net:
(W x H x D) Packed:
390 x 487.8/584 x 227.6 mm (W x H x D: Portrait) approx. 11.1 kg
475 x 705 x 345 mm (W x H x D). approx. 15 kg
Safety certifi cations UL60601-1, CSA C22.2 No.601.1, FCC-B, CE-MDD, VCCI-B
NOTE: Technical specifi cations are subject to change without notice.
Troubleshooting
The display won't turn on! (The power indicator is off.)
Make sure the display is plugged.
Check to see if the display is turned on.
The screen is not lit!
Check if cables are connected correctly.
Check if the computer is turned on.
If the LED indicator is orange, the computer may be in power saving mode. Press any key on the keyboard to wake up
the computer.
The input signal frequency or display resolution may not be appropriate for the display. Refer to the computer instruction
manual and adjust the frequency and/or resolution.
If the LED is red, this may be an error indication. Contact your supplier.
Images are not displayed properly!
The display resolution may not be appropriate for the display. Refer to the computer instruction manual and adjust
resolution.
The refresh rate is set to 50Hz (dual-link mode) and resolution loss (scan line gaps) occurs!
This can happen when a single-link cable or a DisplayPort to Single Link adapter is used. Use the supplied dual-link
cable which supports both single-link (25Hz) and dual-link (50Hz) modes, or set the refresh rate to 25Hz.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec MD215MG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec MD215MG in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info