539932
14
Zoom out
Zoom in
Previous page
1/18
Next page
English-10
Controls
OSD (On-Screen Display) control buttons on the front of the monitor
function as follows:
To access the OSD menu, press the EXIT button. To change the signal input, press the SELECT button.
All buttons are located at the back of the monitor.
The Key Guide appears pressing any button when not in the OSD control menu.
NOTE: The OSD must be closed in order to change the signal input.
3. Control Buttons
ABCDE
4
5
1
6
2
1 KEY GUIDE The Key Guide appears on the screen when the OSD control menu is accessed.
The Key Guide will rotate when the OSD control menu is rotated.
Perform along the notifi cation of each key.
NOTE: The KEY GUIDE appears as follows:
KEY GUIDE when OSD menu is displayed.
KEY GUIDE when HOT KEY is set to OFF.
KEY GUIDE when HOT KEY is set to ON.
Each KEY GUIDE works as follows:
- Exits any OSD sub menu.
Exits the OSD Control menu.
- Shows OSD menu.
- Shows PICTURE MODE.
- Selects the item.
- Changes the input source.
- Resets the OSD back to factory settings.
- Shows the quick screen QA test pattern.
2 LED Indicates that power is on.
3 Control Buttons A. RESET button
NOTE: When not in the OSD control menu, press the RESET button for at least 3 seconds
to display the quick screen QA test pattern (grayscale) drawing and check the display
performance.
B. SELECT button
C. UP/DOWN button
D. LEFT/RIGHT button
E. EXIT button
4 AMBIENT LIGHT Sensor Detects the level of ambient light, allowing the monitor to make adjustments to various
settings. Do not cover this sensor (See page 17, CD-ROM Version).
5 FRONT SENSOR Detects screen luminance changes over time.
Used for luminance stabilization, standalone (Self Calibration, Gamma Adjust, DICOM
Measurement) and network (Gamma Adjutst, DICOM Measurement) controlled calibrations
and conformance tests.
6 SENSOR PORT For optional external sensor used for self calibration and copy calibration.
MD211G3 paper manual.indb 10MD211G3 paper manual.indb 10 3/27/12 11:18:32 AM3/27/12 11:18:32 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec MD211G3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec MD211G3 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info