653980
29
Zoom out
Zoom in
Previous page
1/40
Next page
E-29
Position/Clock
Horizontal
Vertical
Clock
Phase
100
800
50
50
This allows you to manually adjust the image horizontally
and vertically, and adjust Clock and Phase.
[Horizontal/Vertical Position]
Adjusts the image location horizontally and vertically using
the
and
buttons.
This adjustment is made automatically when the Auto Ad-
just is turned on.
[Clock]
Use this item with the “Auto Adjust off” to fine tune the com-
puter image or to remove any vertical banding that might
appear. This function adjusts the clock frequencies that elimi-
nate the horizontal banding in the image. Press the
and
buttons until the banding disappears. This adjustment
may be necessary when you connect your computer for
the first time. This adjustment is made automatically when
the Auto Adjust is turned on.
[Phase]
Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the
and
buttons to adjust the image.
Use “Phase” only after the “Clock” is complete.
This adjustment is made automatically when the Auto Ad-
just is turned on.
See “Auto Adjust” on page E-32 for turning on or off the
Auto Adjust feature.
Resolution (when Auto Adjust is off):
Video Filter (when Auto Adjust is off):Position/ Clock (when Auto Adjust is off):
This allows you to activate or deactivate the Advanced
AccuBlend feature.
Auto ............. Turns on the Advanced AccuBlend feature. The pro-
jector automatically reduces or enlarges the current
image to fit the full screen.
Native ........... Turns off the Advanced AccuBlend feature. The pro-
jector displays the current image in its true resolu-
tion.
See “Auto Adjust” on page E-32 for turning on or
off the Auto Adjust feature.
NOTE: When an image with a resolution of SVGA, XGA, SXGA or UXGA
is displayed, the Resolution is not available.
NOTE: Once the Resolution setting has been changed, the “Aspect”
setting is automatically changed to “Normal”.
Changes all adjustments and settings to the factory preset.
[All Data]
Reset all the adjustments and settings for all the signals
to the factory preset.
The items can be reset except Language, Communication
Speed, Remaining Lamp Time, Lamp Hour Meter and Pro-
jector Usage. To reset the lamp usage time, see “Clear Lamp
Hour Meter” page E-33.
This function reduces video noise.
On ................ The low-pass filter is applied.
Off ................ The low-pass filter is not applied.
Screen adjustments are possible even when the filter is on.
Factory Default
[Current Signal]
Resets the adjustments for the current signal to the factory
preset levels.
The items that can be reset are: Brightness, Contrast, Color,
Hue, Sharpness, Volume, Aspect, Horizontal Position, Ver-
tical Position, Clock, Phase, Resolution, Video Filter,
Gamma Correction, and White Balance.
Resolution
Auto Native
Factry Default
All Data
Current Signal
Video Filter
On Off
All Data Reset
Are you sure ?
Yes
No
Current Signal Reset
Are you sure ?
Yes
No
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec LT75Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec LT75Z in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec LT75Z

Nec LT75Z User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info