653977
37
Zoom out
Zoom in
Previous page
1/56
Next page
Eā€“37
NOTE: There may be cases where the Pointer function is not available (ex. a
non-interlace signal at 15kHz such as video game.)
Menu Display Time :
This option allows you to select how long the projector waits after
the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and
"Auto 45 sec". The "Auto 45 sec" is the factory preset.
Manual .......... The menu can be turned off manually.
Auto 5 sec ..... The menu will automatically be turned off in 5 seconds if no
buttons are pressed within 5 seconds.
Auto 15 sec .....
The menu will automatically be turned off in 15 seconds if no
buttons are pressed within 15 seconds.
Auto 45 sec .....
The menu will automatically be turned off in 45 seconds if no
buttons are pressed within 45 seconds.
Direct Button:
Volume Bar:
This option turns on or off the volume bar when you adjust the sound
volume using VOL+/ā€“(up and down) button.
On ................. You can increase or decrease the sound volume with the vol-
ume bar on screen.
Off ................. You can increase or decrease the sound volume without having
to use the volume bar.
Keystone Bar:
This option turns on or off the keystone bar when you adjust the
keystone using KEYSTONE +/ā€“ button on the remote control.
On ................. You can increase or decrease the level with the keystone bar on
screen.
Off ................. You can increase or decrease the level without having to use the
keystone bar.
Setup
Enables you to set operating options.
Press "OK" to save your changes for all the features of Page1, Page2,
Page3, Page 4 and Page 5.
[Page1]
[Page2]
Orientation:
This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Cinema Position:
This feature selects the vertical position of the image when viewing
video with Cinema aspect ratio selected.
When Cinema aspect ratio is selected on earlier models, the image is
displayed with black borders on the top and bottom.
You can select the vertical position among three options:
Top ................ Image position is at the top with a black border on bottom.
Center ............ Image position is at the center with black borders on top and
bottom.
Bottom ........... Image position is at the bottom with a black border on top.
Background:
Use this feature to display a blue/ black screen or logo when no sig-
nal is available. The default background is blue. You can change the
logo screen using the PC Card Files feature. See page E-40.
Message:
You can choose the desired information to be displayed on the screen.
On ................. The message will be displayed.
Off ................. The message will not be displayed.
Source Display: You can turn on and off the information for input
name such as VIDEO and RGB.
When this option is on, the current input will be displayed each time
you switch sources or turn on the projector.
No Input: This option turns on or off the "No Input" message to be
displayed in the top right corner on the screen.
Projector Pointer:
This enables you to select from eight different Pointer icons for the
"Pointer" button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the se-
lected area on the screen. See page E-28 for more details.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec LT150Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec LT150Z in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec LT150Z

Nec LT150Z User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info