493574
39
Zoom out
Zoom in
Previous page
1/59
Next page
E–39
Clock .......... Use this item to fine tune the computer image or to remove any
vertical banding that might appear. This function adjusts the clock
frequencies that eliminate the horizontal banding in the image.
Press the and buttons until the banding disappears.
This adjustment may be necessary when you connect your com-
puter for the first time. This adjustment is made automatically when
the Auto Adjust is turned on.
Phase ......... Use this item to adjust the clock phase or to reduce video noise,
dot interference or cross talk. (This is evident when part of your
image appears to be shimmering.) Use the and buttons to
adjust the image.
Use "Phase" only after the "Clock" is complete.
This adjustment is made automatically when the Auto Adjust is
turned on.
Resolution (when Auto Adjust is off)
This allows you to activate or deactivate the Advanced AccuBlend
feature.
Auto ............ Turns on the Advanced AccuBlend feature. The projector auto-
matically reduces or enlarges the current image to fit the full screen.
Native ......... Turns off the Advanced AccuBlend feature. The projector displays
the current image in its true resolution.
See "Auto Adjust (RGB Only) on page E-41 for turning on or off
the Auto Adjust feature.
NOTE: While you are displaying an image with higher resolution than the
projector's native resolution, even when you are in the Native mode, the image
is displayed full screen using the Advanced AccuBlend feature.
Factory Default
Changes all adjustments and setting to the factory preset for each
source individually except Lamp Hour Meter, Projector Usage, Lan-
guage and Communication Speed. (To reset the lamp usage time, see
"Clear Lamp Hour Meter" on page E-42.)
All Data ....... Reset all the adjustments and settings for all the signals to the
factory preset.
Current Signal .
Resets the adjustments for the current signal to the factory preset
levels.
The items that can be reset for the currently projected image are:
Picture (Brightness, Contrast, Color, Hue and Sharpness) and Image
Options (Color Temperature, Gamma Correction, Advanced Options
(Aspect Ratio, Noise Reduction, Color Matrix, White Balance, Posi-
tion/Clock, Resolution and Video Filter).
NOTE: The Volume, Keystone and all the items in the Projector Options can be
reset only when "All Data" is selected.
Menu
Projector Options
Video Filter (when Auto Adjust is off)
This function reduces video noise.
On ................ The low-pass filter is applied.
Off ................ The filter is removed.
Screen adjustments are possible even when the filter is On.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec LT150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec LT150 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec LT150

Nec LT150 User Manual - German - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info