493579
15
Zoom out
Zoom in
Previous page
1/43
Next page
E–15
Wiring Diagram
PC CONTROL
USB
RGB INPUT S-VIDEO
VIDEO AUDIO
L
(
MONO
)
R
PC CARD
ACCESS
MOUSE OUT
Optional Component V cable
To video, S-video, and audio
inputs on the projector.
Optional mouse adapter (For Macintosh)
Optional mouse adapter (For IBM PS/2)
Pin adapter for Macintosh (supplied)
Signal cable (supplied)
To mini D-Sub 15-pin connector on the projector. It is recommended that
you use a commercially available distribution amplifier if connecting a
signal cable longer than the supplied one.
IBM PC or Compatibles
(Desk top type or notebook type)
Macintosh or Compatibles
(Desk top type or notebook type)
Document Camera
DVD Player (with component output)
VCR, DVD Player or LaserDisc Player
Remote Control Guideline for the Optional Full Func-
tion Remote Control
1. Plug the optional serial cable with the mouse output port of the
projector into your computer’s mouse port and restart your com-
puter to gain remote mouse control.
2. When using the remote control’s built-in infrared mouse on a laptop
computer, the laptop’s mouse, trackball or trackpad will be dis-
abled. Disconnect the optional serial cable from the mouse output
port and restart your computer to regain trackball or trackpad
mouse control.
3. If the screen goes blank while using your remote control, it may
be the result of the computer’s screen-saver or power manage-
ment software.
4. If you accidentally hit the OFF button on the remote control, wait
one full minute and then press the ON button to resume.
Connecting Your PC or Macintosh Computer
Connecting your PC or Macintosh computer to your MultiSync LT84
(SVGA)/LT140 (XGA) projector will enable you to project your
computer’s screen image for an impressive presentation.
To connect to a PC or Macintosh, simply:
1. Turn off the power to your projector and computer.
2. Use the signal cable that’s supplied to connect your PC or
Macintosh computer to the projector. For older Macintosh, use
the supplied pin adapter to connect to your Mac's video port.
NOTE:The new Macintosh computer such as G3 will have the 15
pin HD connector. The LT84/LT140's "Plug and Play" data will
be downloaded to the Macintosh. Therefore, the Mac adapter will
not be necessary.
3. Turn on the projector and the computer.
4. If the projector goes blank after a period of inactivity, it may be
caused by a screen saver installed on the computer you’ve con-
nected to the projector.
Optional serial cable
Commercially available
USB Mouse
NOTE: When using with a notebook PC, be
sure to connect between the projector and
the notebook PC before turning on the power
to the notebook PC. In most cases signal
cannot be output from RGB output unless the
notebook PC is turned on after connecting
with the projector.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec LT140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec LT140 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec LT140

Nec LT140 User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info