214508
25
Zoom out
Zoom in
Previous page
1/72
Next page
17
3. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
Turning on the Projector
NOTE: Before turning on the projector, first connect the supplied power cable's three-pin plug to the AC IN of the projector, and then
connect the other plug of the supplied power cable in the wall outlet. Make sure that the projector is in its standby mode and the
power indicator is glowing orange.
1. Remove the lens cap.
POWER
STATUS
LAMP
POWER
STATUS
LAMP
POWER
STATUS
LAMP
Standby Blinking Power On
Steady orange light Blinking green
light
Steady green
light
See page 50 for more details.
LAMP
STATUS
POWER
SOURCE AUTO ADJ.
ON/STAND BY
UP
PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
FOCUS
MENU
CAUTION:
Do not remove the lens cap by pulling on the string.
Doing so can cause mechanical damage to the part
around the lens.
2. Press the POWER (ON/STAND BY) button on the pro-
jector cabinet or the POWER ON button on the remote
control for 1 second.
The POWER indicator will turn to green and the projector
will become ready to use.
TIP:
*Turning on the projector will instantly cause the Auto Focus
function to operate. (
page 22)
* When the key lock symbol (
) is displayed at the bottom
right of the menu, it means that the Control Panel Lock is turned
on. (
page 41)
After you turn on your projector, ensure that the computer
or video source is turned on and that your lens cap is re-
moved.
NOTE: When no signal is available, a blue or black screen is dis-
played.
When the projector displays a blue or black screen, the projector will
automatically switch to the Eco mode.
The projector will return to the Normal mode once a signal is con-
nected.
NOTE: If you turn on the projector immediately after the lamp is turned
off or when the temperature is high, the fans run without displaying
an image for some time and then the projector will display the im-
age.
CAUTION:
The projector cannot be turned off for 60 seconds af-
ter the lamp is turned on and while the POWER indica-
tor is blinking green.
Do not turn off the AC power during this period.
Doing so could cause premature lamp failure.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec lt 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec lt 25 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec lt 25

Nec lt 25 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info