493542
125
Zoom out
Zoom in
Previous page
1/149
Next page
E-125
Does not turn on
No picture
Image isn’t square to the
screen
Picture is blurred
Image is scrolling verti-
cally, horizontally or
both
Remote control does
not work
Indicator is lit or blink-
ing
Cross color in RGB
mode
USB mouse does not
work
Check that the power cable is plugged in and that the power button on the projector
cabinet or the remote control is on. See pages E-36 and 37.
Ensure that the lamp cover is installed correctly. See page E-120.
Check to see if the projector has overheated or the lamp usage exceeds 1600 hours
(up to 2100 hours : Eco mode). If there is insufficient ventilation around the projec-
tor or if the room where you’re presenting is particularly warm, move the projector
to a cooler location.
Use the menu to select your source (RGB 1/2, Video, S-Video, Viewer or LAN). See
page E-40.
Ensure your cables are connected properly.
Use menus to adjust the brightness and contrast. See page E-85.
Remove the lens cap.
Reset the settings or adjustments to factory preset levels using the Factory Default
in the Adjustment Menu. See page E-117.
Reposition the projector to improve its angle to the screen. See page E-42 or 43.
Use the 3DReform function to correct the trapezoid distortion. See page E-45.
Adjust the focus. See page E-44.
Reposition the projector to improve its angle to the screen. See page E-42 or 43.
Ensure that the distance between the projector and screen is within the adjustment
range of the lens. See page E-22-26.
Condensation may form on the lens if the projector is cold, brought into a warm
place and is then turned on. Should this happen, let the projector stand until there is
no condensation on the lens.
Use menus or Source button on the remote control or the cabinet to select the
source you want to input.
Install new batteries. See page E-19.
Make sure there are no obstacles between you and the projector.
Stand within 22 feet (7 m) of the projector. See page E-20.
Make sure that you are in the Projector mode and the PJ button lights in red. If not,
press the PJ button. See page E-53.
See the Status Indicator on pages E-123 and 124.
If Auto Adjust is off, turn it on or adjust the image manually with the Position/Clock
in the Image Options. See pages E-87, 88 and 98.
Make sure that your USB mouse is properly connected to the projector.
The projector may not support some brands of a USB mouse.
Problem Check These Items
Common Problems & Solutions
TROUBLESHOOTING
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec LT 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec LT 240 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec LT 240

Nec LT 240 User Manual - German - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info