214287

Nec lt 170 Manual

32
Zoom out
Zoom in
Previous page
1/45
Next page
E-32
USING ON-SCREEN MENU
Advanced Menu
[Image]
Enabling Auto Adjust [Auto Adjust]
When “Auto Adjust” is set to “On”, the projector automatically determines
the best resolution for the current RGB input signal to project an image
using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology.
The image can be automatically adjusted for position and stability;
“Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.
On .................. Automatically adjusts image “Horizontal Position”, “Ver-
tical Position”, “Clock” and “Phase”.
Off .................. User can adjust the image display functions (“Horizon-
tal Position”, “Vertical Position”, “Clock” and “Phase”)
manually.
Adjusting Position/Clock (when Auto Adjust is off)
This allows you to manually adjust the image horizontally and vertically,
and adjust Clock and Phase.
[Horizontal/Vertical]
Adjusts the image location horizontally and vertically.
This adjustment is made automatically when the Auto Adjust is turned
on.
[Clock]
Use this item with the “Auto Adjust off” to fine tune the computer im-
age or to remove any vertical banding that might appear. This function
adjusts the clock frequencies that eliminate the horizontal banding in
the image. This adjustment may be necessary when you connect your
computer for the first time. This adjustment is made automatically when
the Auto Adjust is turned on.
[Phase]
Use this item to adjust the clock phase or to reduce video noise, dot
interference or cross talk. (This is evident when part of your image
appears to be shimmering.)
Use “Phase” only after the “Clock” is complete.
This adjustment is made automatically when the Auto Adjust is turned
on.
Turning On Noise Reduction [Noise Reduction]
Reduces video noise.
NOTE: The lower the Noise Reduction level, the better the image quality by way
of higher video bandwidth.
Turning On Flicker Reduction [Flicker Reduction]
Reduces flicker which can occur in an interlaced signal.
NOTE: When the Flicker Reduction is ON, jagged lines can be visible depending
on the signal. In that case, select OFF.
Adjusting White Balance [Brightness R/G/B, Contrast R/G/B]
This allows you to adjust the white balance. Brightness for each color
(RGB) is used to adjust the black level of the screen; Contrast for each
color (RGB) to adjust the white level of the screen.
Selecting White Peaking [White Peaking]
Adjust the brightness of the white areas. As the picture becomes dim,
it looks more natural.
NOTE: The White Peaking option is not available when “Presentation” is selected
in “Base Setting”.
[Brightness]
Adjusts the brightness level or the back raster intensity.
[Contrast]
Adjusts the intensity of the image according to the incoming signal.
[Sharpness]
Controls the detail of the image for Video.
[Color]
Increases or decreases the color saturation level (not valid for RGB).
[Hue]
Varies the color level from +/- green to +/-blue. The red level is used as
reference. This adjustment is only valid for Video and Component inputs
(not valid for RGB).
NOTE: Some Picture items cannot be available depending on the input signal.
Input signal Brightness Contrast Sharpness Color Hue
RGB
Yes Yes Yes No No
(Computer)
Component
Yes Yes Yes Yes*
1
No
(Computer)
Video and S-Video Yes Yes Yes Yes Yes*
2
Yes: Available No: Not available
*
1
Available on DVD (15 kHz), but not available on HDTV, 525p (480p)
and 750p (720p).
*
2
Available on NTSC only.
Correcting Vertical Keystone Distortion [Keystone]
Corrects vertical keystone distortion.
Auto ............... Corrects vertical keystone distortion automatically. See
page E-20.
Manual ........... Allows you to manually correct vertical keystone dis-
tortion.
Manual (Save) This option enables you to save your current keystone
correction settings. The settings are saved when you
turn off the projector.
When you select “Manual” or “Manual (Save)“, you can correct keystone
distortion using the Keystone slide bar.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec lt 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec lt 170 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec lt 170

Nec lt 170 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info