493569
57
Zoom out
Zoom in
Previous page
1/74
Next page
E-50
Does not turn on
Lamp does not turn on;
POWER and STATUS
LEDs are blinking green
at the same time
Will turn off
No picture
Image isn’t square to the
screen
Color tone or hue is un-
usual
Check that the power cable is plugged in and that the power button on the
projector cabinet or the remote control is on. See pages E-20 and E-21.
Ensure that the lamp cover or lamp housing is installed correctly. See page
E-47.
Check to see if the projector has overheated or the lamp has reached the end
of its usable life. If there is insufficient ventilation around the projector or if
the room where you’re presenting is particularly warm, move the projector
to a cooler location.
The lamp may fail to light. Wait a full minute and then turn on the power
again.
The lamp has reached the end of its usable life. Replace the lamp.
•Wait for 60 seconds (cooling period)to see if the lamp turns on by itself.
POWER and STATUS LEDs blinking green at the same time indicates the
main power was interrupted during previous operation.
Ensure that the Power Management is off. See page E-42.
Use the VIDEO, S-VIDEO, C-VIDEO or COMP. button on the remote control
or the SOURCE button on the cabinet to select your source (Video, S-Video,
Component or Computer). See page E-23.
Ensure your cables are connected properly.
Use menus to adjust the brightness and contrast. See page E-35.
Reset the settings or adjustments to factory preset levels using “Reset” in
the menu. See page E-44.
Enter your registered keyword if the Security function is enabled. See page
E-39.
When using with a notebook PC, be sure to connect between the projector
and the notebook PC before turning on the power to the notebook PC. In
most cases signal cannot be output from RGB output unless the notebook
PC is turned on after connecting with the projector.
* If the screen goes blank while using your remote control, it may be the
result of the computer’s screensaver or power management software.
* For more detailed, see page E-52.
Reposition the projector to improve its angle to the screen. See pages E-23
and E-24.
Use the Keystone correction function to correct the trapezoid distortion. See
page E-26.
Check if an appropriate color is selected in “Wall Color”. If so, select an
appropriate option. See page E-35.
Adjust “Hue” in “Picture”. See page E-35.
Check These Items
Common Problems & Solutions
Problem
7. TROUBLESHOOTING
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec HT510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec HT510 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec HT510

Nec HT510 User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info