216054
114
Zoom out
Zoom in
Previous page
1/115
Next page
10-12
⁄0 Operation Using an HTTP Browser
Overview
The use of HTTP server functions will allow control of the projec-
tor from a web browser without the installation of special soft-
ware. Please be sure to use “Microsoft Internet Explorer 4.x” or a
higher version for the web browser. (This device uses “JavaScript”
and “Cookies” and the browser should be set to accept these
functions. The setting method will vary depending on the version
of browser. Please refer to the help files and the other informa-
tion provided in your software.)
NOTE:
* The use of HTTP server functions is not available during Standby mode.
* The display’s or button’s response can be slowed down or operation may not be
accepted depending the settings of your network. Should this happen, consult
your network administrator.
* The projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can’t get any
response, pull out and then re-insert the LAN card.
* Do not use the HTTP Server functions and the Dynamic Image Utility included on
the supplied CD-ROM. Using both at the same time may result in a connection
failure or slow response.
Access is gained to the HTTP server functions by specifying
http:// <the projector’s IP address> /index.html
in the entry column of the URL.
Preparation Before Use
Make network connections and set up the projector and confirm
that it is complete before engaging in browser operations. (See
“LAN Mode” on page 8-19.)
Operation with a browser that uses a proxy server may not be
possible depending on the type of proxy server and the setting
method. Although the type of proxy server will be a factor, it is
possible that items that have actually been set will not be dis-
played depending on the effectiveness of the cache, and the con-
tents set from the browser may not be reflected in operation. It is
recommended that a proxy server not be used unless it is un-
avoidable.
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or
entered to the URL column when operation of the projector is via
a browser, the host name can be used as it is when the host
name corresponding to the IP address of the projector has been
registered to the domain name server by a network administra-
tor, or the host name corresponding to the IP address of the pro-
jector has been set in the “HOSTS” file of the computer being
used.
Example 1: When the host name of the projector has been set to
“pj.nec.co.jp”, http://pj.nec.co.jp/index.html is specified for the
address or the entry column of the URL.
Example 2: When the IP address of the projector is
“192.168.73.1”, access is gained to the HTTP server func-
tions by specifying
http://192.168.73.1/index.html for the address or the entry
column of the URL.
Structure of the HTTP Server
Power: This controls the power of the projector.
On ............... Power is switched on.
Off ............... Power is switched off.
Volume: This controls the volume of the projector.
̆ ................. Increments the volume adjustment value.
̄ ................. Decrements the volume adjustment value.
Mute: This controls the mute function of the projector.
All On .......... Mutes each of the video, audio, and on-screen
display functions.
All Off ..........Cancels the muting of each of the video, audio,
and on-screen display functions.
Picture On ... Mutes the video.
Picture Off ... Cancels the video muting.
Sound On .... Mutes the audio.
Sound Off .... Cancels the audio muting.
OSD On ....... Mutes the on-screen display.
OSD Off ....... Cancels the muting of the on-screen display.
Picture: Controls the video adjustment of the projector.
Brightness ̆ Increments the brightness adjustment value.
Brightness ̄ Decrements the brightness adjustment value.
Contrast ̆ ... Increments the contrast adjustment value.
Contrast ̄ ... Decrements the contrast adjustment value.
Color ̆ ........ Increments the color adjustment value.
Color ̄ ........ Decrements the color adjustment value.
Hue ̆ .......... Increments the hue adjustment value.
Hue ̄ .......... Decrements the hue adjustment value.
Sharpness ̆Increments the sharpness adjustment value.
Sharpness ̄Decrements the sharpness adjustment value.
* The functions that can be controlled will vary depending on the signal
being input to the projector.
10. Appendix
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec gt6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec gt6000 in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec gt6000

Nec gt6000 User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info