The top right diagram shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown
using the normal projection position as a starting point.
Maximum Possible Range for GT13ZLB/GT19ZLB/GT24ZLB/GT34ZLB:
Values in parentheses for GT13ZLB.
Up:0.39V (0.32V)(V: height of projected image)
Down:0.39V (0.32V)
Right:0.24H (0.19H)(H: height of projected image)
Left:0.24H (0.19H)
NOTE: Lens shift is not available on the GT06RLB and the GT10RLB rear lens. The GT06RLB and the GT10RLB should be used only for “zero degree/no-offset” applica-
tions.
NOTE: If lens is shifted in two directions combined, maximum range in either direction cannot be obtained due to rounded off area of lens. (example: shift up and right)
See top right diagram.
2. Installation
1H
1H
0.24H
(0.19H)
0.24H
(0.19H)
0.39V
(0.32V)
0.39V
(0.32V)
0.39V
(0.32V)
0.39V
(0.32V)
0.24H
(0.19H)
0.24H
(0.19H)
1V1V
1V
Desktop/Front
Vertical
Ceiling/Front
Vertical
Normal position
Normal position
Normal position
Horizontal
Normal projection position
WARNING
*Installing the projector on the ceiling must be done by a qualified tech-
nician.
•Tilting the front of the projector up or down by more than 45° from
level could reduce lamp life by up to 20%.
•Only use your projector on a solid, level surface. If the projector falls,
you could be injured and the projector severely damaged.
•Do not use the projector where temperatures vary greatly. The pro-
jector must be used at temperatures between 32°F (0°C) and 95°F
(35°C).
•Do not expose the projector to moisture, dust, or smoke. This will
reduce the quality of the image.
•Ensure that you have adequate ventilation around your projector so
heat can dissipate. Do not cover the vents on the projector.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Nec GT 5000 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Nec GT 5000 in the language / languages: English as an attachment in your email.
The manual is 4,89 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
