170484
238
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
238
www.nec-computers.com
BIOS Setup Utility
The BIOS Setup Utility is used to change system configuration parameters. The utility
is resident in the system FLASH memory and does not require a diskette or an
operating system present to run.
Using the BIOS Setup Utility
You access the BIOS Setup utility when you turn on or reboot your system. To run the
BIOS Setup Utility, perform the following procedure:
1. Power-on or reboot the system. “Press <F2> to enter SETUP” displays.
2. Press F2. The BIOS Setup Utility starts and the Main Menu is displayed. The
menu bar at the top of the Main Menu lists the following selections:
Use the arrow keys to select a menu or an item on a displayed menu. Press the value
keys (listed in the table below) to cycle through the allowable values for the selected
field. Use the Exit menu’s “Save Values” selection to save the current values on all the
menus.
To display a submenu, position the cursor on a selection that has a submenu and press
ENTER. An arrow precedes selections with submenus.
Table 31: Main Menu
Menu Use
Standard BIOS
Features
Use this menu for basic system configuration.
Boot Configuration
Features
Use this menu to set the boot sequence and various “on boot”
options.
Advanced BIOS
Features
Use this menu to set the CPU, the drives, the super IO and the
remote access configurations.
Advanced Chipset
Features
Use this menu to configure the oboard devices and the advanced
chipset .
Power Management
Features
Use this menu to configure the power management settings.
Hardware Health
Configure
Use this menu to specify hardware monitoring values.
BIOS Security
Features
Use this menu to set passwords.
Load Optimal
Defaults
Loads the optimal default settings.
Load Failsafe
Defaults
Loads the failsafe default settings.
Save Changes and
Exit
Saves the changes and exist the BIOS Setup utility.
Discard Changes
and Exit
Discards the changes just made and exits the BIOS Setup utility.
238


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info