170484

Nec express5800 tm800 nl Manual

233
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
233
www.nec-computers.com
Microcode Error BIOS could not find or load the CPU Microcode
Update to the CPU. This message only applies to
INTEL CPUs.
The message is most likely to appear when a brand
new CPU is installed in a motherboard with an out-
dated BIOS. In this case, the BIOS must be updated to
include the Microcode Update for the new CPU.
NVRAM Checksum
Bad, NVRAM
Cleared
There was an error in while validating the NVRAM
data. This causes POST to clear the NVRAM data.
Resource Conflict More than one system device is trying to use the same
non-shareable resources (Memory or I/O).
NVRAM Ignored The NVRAM data used to store Plug’n’Play (PnP)
data was not used for system configuration in POST.
NVRAM Bad The NVRAM data used to store Plug’n’Play (PnP)
data was not used for system configuration in POST
due to a data error.
Static Resource Con-
flict
Two or more Static Devices are trying to use the
resource space (usually Memory or I/O).
PCI I/O conflict A PCI adapter generated an I/O resource conflict
when configured by BIOS POST.
PCI ROM conflict A PCI adapter generated an I/O resource conflict
when configured by BIOS POST.
PCI IRQ conflict A PCI adapter generated an I/O resource conflict
when configured by BIOS POST.
PCI IRQ routing
table error
BIOS POST (DIM code) found a PCI device in the
system but was unable to figure out how to route an
IRQ to the device. Usually this error is causing by an
incomplete description of the PCI Interrupt Routing of
the system.
Timer Error Indicates an error while programming the count regis-
ter of channel 2 of the 8254 timer. This may indicate a
problem with system hardware.
Refresh timer test
failed
BIOS POST found that the refresh timer hardware
failed to pass the Refresh Retrace Test.
Interrupt Controller-1
error
BIOS POST could not initialize the Master Interrupt
Controller. This may indicate a problem with system
hardware.
Interrupt Controller-2
error
BIOS POST could not initialize the Slave Interrupt
Controller. This may indicate a problem with system
hardware.
Table 24: System Configuration Errors And Messages (Continued)
On-screen error
message
Description / Action to be taken
… 233 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info