170484

Nec express5800 tm800 nl Manual

190
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
190
www.nec-computers.com
If only the supervisor password is set, you:
■ Must enter the supervisor password to enter BIOS Setup.
■ Must enter the supervisor password to boot the server if Password on Boot is
enabled in the BIOS Setup.
■ Must enter the supervisor password to exit secure mode.
If both passwords are set, you:
■ May enter the user password to enter BIOS Setup. However, you will not be able
to change many of the options.
■ Must enter the supervisor password if you want to enter BIOS Setup and have
access to all of the options.
■ May enter either password to boot the server if Password on Boot is enabled in
either the BIOS Setup.
■ May enter either password to exit secure mode.
Secure Mode
Configure and enable the secure boot mode by using the BIOS Setup (See “BIOS Setup
Utility” on page 238).
When secure mode is in effect:
■ You can boot the server and the operating system will run, but you must enter the
user password to use the keyboard or mouse.
■ You cannot turn off the server power or reset the server from the front panel
switches.
Secure mode has no effect on functions enabled via remote server management or
power control via the watchdog timer.
Taking the server out of secure mode does not change the state of system power. That
is, if you press and release the power switch while secure mode is in effect, the system
will not be powered off when secure mode is later removed. However, if the front panel
power switch remains depressed when secure mode is removed, the server will be
powered off.
Software Security Features
The table below lists the software security features and describes what protection each
offers. In general, to enable or set the features listed here, run the BIOS Setup and go to
the Security Menu (See “BIOS Security Features Menu” on page 250).
The table also refers to the Setup utility (See “
BIOS Setup Utility” on page 238).
Note: Some of the measures listed below may not be
available on your server.
… 190 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info