170484
176
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
176
www.nec-computers.com
Complete RAID configuration and management utility in the BIOS
Provides graphical RAID management software
Support for transparent array (data) migration to Adaptec Intelligent RAID cards
Supports Hot Swap of drives
Support for Auto Rebuild (if there is a spare)
Support for Auto Verify
Enabling HostRAID on your system
HostRAID may have been factory-enabled on your system.
We recommend your perform the steps below to ensure it is the case, or, if applicable,
to set the array configuration to [Mark Bootable].
This setting is essential to obtain memory dump data that is required for recovery
activities by a service person in the event of a system failure. The setting is required for
both seamless installation and manual installation.
Setting the array configuration to [Mark Bootable]
1. Start the system.
2. When the following message is displayed on the screen, press the <Ctrl> and
<A> keys at the same time: “Press <Ctrl><A> for Adaptec RAID
Configuration Utility”
3. The RAID Configuration Utility menu will be displayed after a while. Select
[Array Configuration Utility] and press the <Enter> key.
4. Select [Manage Arrays] in the main menu and press the <Enter> key.
5. An array that has been created is displayed in [List of Arrays]. Press the <Ctrl>
and <B> keys at the same time. Select [Y] on the confirmation message.
6. “Mark Bootable” has been set. You can confirm the setting by checking if the
array displayed in [List of Arrays] is prefixed with “*”.
7. After confirming the setting, close the Array Configuration Utility and restart
the system. The setting becomes effective after restart.
For details about the Array Configuration Utility, see “RAID Configuration using the
Array Configuration Utility” on page 130.
References
For more information on the BIOS setup utility, refer to BIOS Setup Utility” on
page 238.
For more information on ASMBE, refer to Adaptec Storage Manager - Browser
Edition” on page 166.
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info