170484
126
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
126
www.nec-computers.com
Upgrading Microprocessor
Your system is fitted with a processor installed in a socket LGA 775.
Removing a Processor
1. Remove the right side door. See “Removing the Right Side Door” on page 114.
1. Lay the server on its left side (this is not mandatory, but it will make the
process easier to follow).
2. Disconnect the fan cable(s) from the processor fan connector(s) on the
motherboard.
3. Remove the processor heatsink:
- Remove the four screws fastening the heatsink to the motherboard.
- Remove the heatsink manually using a gentle rocking motion.
Note: To reassemble the heatsink:
Reset the fastener’s caps to their original position.
Re-attach the cable to the cable management clips.
4. Open the processor socket:
- Use your right thumb to push down and outwards the lever in order to dis-
engage it from the retention tab.
Caution
If you do not follow scrupulously these instructions, the lever
can bounce back and cause bend contacts.
- Rotate the load lever to its fully open position at approximately 135°.
- Rotate the load lever to its fully open position at approximately 100°.
5. Grasp the processor (use your index to hold the load plate side, and your thumb
to hold the lever side).
6. Lift the processor straight and away.
7. Set the processor immediately in its protective cover.
- Hold the CPU by three of its corners.
- The chamber of the protective cover should match the connection 1 on the
CPU.
- The rentention tabs on the cover and the processor contacts should point
each other.
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info