797055
3
Zoom out
Zoom in
Previous page
1/32
Next page
2 PLACE CHARGE BASE IN THE PROPER LOCATION
Choose a wall outlet that has a 3ˇ(1 m)
clearance on both sides and in front of the
charge base. This helps your robot find
the charge base.
Push the charge base against the wall
and plug in the power cord.
Place the rounded side of your Neato
robot against the metal charging
contacts on the charge base. The battery
LED should light up.
For best results, charge the robot fully
before your first cleaning cycle. A green
battery LED indicates a full battery.
SETTING UP YOUR ROBOT
ENGLISH
3 CHARGE YOUR ROBOT
Adjust the length of the
cord by wrapping it as shown.
NOTE: During bootup, the robot LEDs
next to the Start Button will blink. You
will need to wait for an audible tone
before performing additional functions.
Charging
Contacts
1 SET UP CHARGE BASE
Plug the power cord firmly into
the charge base.
When the cable
is plugged in LED
should light up.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neato Botvac D4 Connected at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neato Botvac D4 Connected in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neato Botvac D4 Connected

Neato Botvac D4 Connected User Manual - English - 22 pages

Neato Botvac D4 Connected User Manual - German - 22 pages

Neato Botvac D4 Connected User Manual - Dutch - 22 pages

Neato Botvac D4 Connected User Manual - French - 22 pages

Neato Botvac D4 Connected User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info