Manual NDS 3Link (page 9 of 22) (English)

688839

Zoom out

Zoom in

1/22

NUMBER FUNCTION

1 Touch screen display

2 Hole for passage of communication cable

3 4 Holes for fixing the cover to the wall

4 System to fix the display frame to the cover

1. Remove the display frame.

2. Position the back cover on the wall chosen for installation. Take the point references

where the holes for the fixing screws (diameter 3 mm) and the communication cable

passage hole (minimum diameter 7.2 mm) are to be made.

3. Drill the holes and screw the back cover to the wall using the supplied screws. Be

careful that once tightened, the screws do not protrude beyond the countersinks.

4. Pass the communication cable through the specially-drilled hole and insert it gently

into the connector on the display circuit board.

DO NOT FORCE THE CONNECTOR.

The connector has an

obligatory direction that must be

followed.

A) Slide the display frame upwards

with respect to the back cover

B) Lift the lower part

of the display

frame

C) Slide the display frame

downwards with respect to the

cover and release it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NDS 3Link in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NDS 3Link Manual

Product: