28502
19
Zoom out
Zoom in
Previous page
1/88
Next page
TRACKFISH 6500 Installation and Operation Manual 19
NAVMAN
3-1-1 Navigating to a point
When the TRACKFISH is navigating to a
point, the chart and highway displays show
navigation data:
A The boat position .
B The destination point marked with a circle.
C The boat’s plotted course to the
destination.
D Two CDI lines, parallel to the boat’s plotted
course, which indicate the maximum
expected deviation from the plotted
course.
For more information, see appendix C.
If the TRACKFISH is connected to an autopilot,
the TRACKFISH will send data to the autopilot
to steer the boat to the destination. Start the
autopilot before starting to navigate to the
point.
If the TRACKFISH has no autopilot, steer the
boat manually:
a use the boat position and destination on
the chart or highway displays
b or use navigation data displayed on the
data header (see section 2-7-3)
c or use COG and BRG on the compass (see
section 2-7-4).
Note:
1 If the XTE alarm is enabled, an alarm will
sound if the boat deviates too much from
its intended course (see section 17-8).
2 If the arrival radius alarm is enabled, then
an alarm will sound to show that the boat
has reached the destination
(see section 17-8).
A waypoint is a position that you can set on the
TRACKFISH chart, for example a fishing spot or
a point on a route (see section 5).
Going to a waypoint from the chart display
1 Go to the chart display.
2 Move the cursor to the waypoint: either
use the cursor keys or use Find (see section
3-2-5).
3 Press and select Goto.
Going to a waypoint from the waypoints
display
1 Go to the waypoints display.
2 Press or to highlight the waypoint to
go to.
3 Press and select Goto.
Going to a point on the chart
1 Switch to a chart display.
3-1-2 Going to a waypoint or to a point on the chart
2 Move the cursor to the destination point:
either use the cursor keys or use Find (see
section 3-2-5).
3 Press and select Goto cursor.
Warning: Make sure the course does not
pass over land or dangerous waters.
Navigating
The TRACKFISH navigates to the point as
described in section 3-1-1.
Cancelling navigating
Go to a Chart display, press and select
Cancel goto.
Tip: Before starting, create waypoints at
points of interest. Create a waypoint at the
start of the trip for you to navigate back to (see
section 5-2-1).
A
B
C
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman TRACKFISH_6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman TRACKFISH_6500 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman TRACKFISH_6500

Navman TRACKFISH_6500 User Manual - German - 88 pages

Navman TRACKFISH_6500 User Manual - Dutch - 88 pages

Navman TRACKFISH_6500 User Manual - French - 89 pages

Navman TRACKFISH_6500 User Manual - Italian - 90 pages

Navman TRACKFISH_6500 User Manual - Swedish - 87 pages

Navman TRACKFISH_6500 User Manual - Spanish - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info