512557
51
Zoom out
Zoom in
Previous page
1/83
Next page
TRACKFISH 6600 Installation and Operation Manual52
NAVMAN
and longitude coordinates of objects on the
TRACKFISH chart display are different to the
latitude and longitude coordinates of these
objects on the paper chart. This applies to all
objects, such as the boat, waypoints, tracks,
lines of latitude and longitude and cartographic
features such as land, rocks, buoys and
depth contours.
Use Map datum to select the TRACKFISH map
datum to match the datum of the paper chart.
Then, the latitude and longitude coordinates
of objects displayed on the TRACKFISH will
change to match the corresponding coordinates
on the paper chart.
Setting map datum
1 In the Chart setup menu, select Map
datum.
2 Select the map datum for the paper chart
you are using.
3 The TRACKFISH asks if you want to
apply the datum offset to latitude and
longitude coordinates sent on the NMEA
output. The options are:
Yes: Latitude and longitude coordinates
displayed on any NMEA repeaters match
the coordinates on the TRACKFISH.
However, latitude and longitude
coordinates broadcast on any NMEA
VHF transmitter will be slightly offset from
coordinates on a WGS 84 chart.
No: Latitude and longitude coordinates
displayed on any NMEA repeater
do not match the coordinates on the
TRACKFISH. Latitude and longitude
coordinates broadcast on any NMEA
VHF transmitter will be the same as the
coordinates on a WGS 84 chart.
Warning: When you change to a
chart with a different datum, change the
TRACKER map datum again.
Map shift
Some charts have consistent position errors.
To correct this, apply a map shift. After a
map shift:
The positions of cartographic features
(such as land, rocks, buoys and depth
contours) move on the TRACKFISH chart
display to where they should be.
The positions of the boat, waypoints,
tracks, and lines of latitude and longitude
on the TRACKFISH chart display remain
unchanged.
Warning: Map shift is for eliminating
minor offsets. It should not be used if the
correct datum is available. Use map shift
with caution: incorrect application will
cause incorrect boat positions.
Applying a map shift
1 Move the boat to a known point on the
chart, for example a marina berth.
2 In the Chart setup menu, select
Map shift.
3 Move the cursor to the position on the
chart where the boat actually is.
4 Press ENTER to set the new map shift.
The boat will now be displayed at its
actual location.
Clearing the map shift
Clearing the map shift removes any map
shift from the cartographic features on the
TRACKFISH chart display.
1 In the Chart setup menu, select
Map shift.
2 Press MENU and select Clear.
Waypoints
Controls how waypoints are displayed on the
chart. The options are:
Hide all: No waypoints are
displayed (except for waypoints on any
selected route).
Show all: All waypoints are displayed.
Selected: Waypoints with their display
option set to Icon or I+N (Icon and Name)
are displayed (see section 5).
Chart display options
The other chart setup options allow an extensive
range of chart card features to be shown.
Con gure the most useful display format.
Note:
Bathymetric Lines and soundings
Chart cards contain a large amount of spot
sounding and depth contour data. This can be
selectively displayed by turning Bathymetric
Lines and Spot Soundings on, then selecting
the range to display with Bath and Sndgs Min
and Max.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Trackfish 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Trackfish 6600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Trackfish 6600

Navman Trackfish 6600 User Manual - German - 76 pages

Navman Trackfish 6600 User Manual - Dutch - 81 pages

Navman Trackfish 6600 User Manual - Italian - 81 pages

Navman Trackfish 6600 User Manual - Swedish - 78 pages

Navman Trackfish 6600 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info