512557
46
Zoom out
Zoom in
Previous page
1/83
Next page
TRACKFISH 6600 Installation and Operation Manual 47
NAVMAN
13 User card display
A C-MAP™ user card is an optional plug-in
card that can store data les (see section 1-
2). There are three types of les: waypoints,
routes or a track.
To go to the user card display, press DISPLAY,
select Other, then select User card.
Note: The older 5 volt cards are not
supported.
The user card display has:
File list
A list of the files on any user card in the
TRACKFISH. If there are more les than
will t on the display, press
or to
scroll up or down a page at a time.
Waypts, Routes
The number of waypoints and routes
currently in the TRACKFISH.
Track 1 to Track 5
The number of points in tracks 1 to 5
currently in the TRACKFISH.
Note:
To save TRACKFISH data onto the
user card, use the Save command
(see below).
Data stored on the user card and shown
on the file list is not available to be used
by the TRACKFISH until loaded into the
TRACKFISH with the LOAD command
(see below).
Saving data to the user card
This saves all the TRACKFISH’s waypoints,
all the TRACKFISH’s routes or one of the
TRACKFISH’s tracks to one file on the
user card.
1 Press MENU and select Save.
2 Select Waypts, Routes or Tracks.
3 For Tracks, select the track number
to save.
4 The new le is created. Change the name
if required. The new le appears in the
le list.
Loading data from the user card
to the TRACKFISH
This loads one le from the user card to the
TRACKFISH:
A waypoints le: The new waypoints
are added to any existing waypoints in
the TRACKFISH. If a new waypoint has
the same name as an existing waypoint
but has different data, the TRACKFISH
displays both waypoints. Select:
Skip: Do not load the new waypoint.
Replace: Load the new waypoint and
replace the existing one.
Skip all: Do not load any new
waypoints which have the same
names as existing waypoints.
Rplc. all: Load all new waypoints
which have the same names as
existing waypoints; the new waypoints
replace the existing waypoints.
A routes le: The new routes are added
to any existing routes in the TRACKFISH.
If a new route has the same name as
an existing route but has different data
then the TRACKFISH asks which route
to keep.
A track le: The new track will replace the
existing track in the TRACKFISH.
To load a le to the TRACKFISH:
1 Select the le to load.
2 Press MENU and select Load.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Trackfish 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Trackfish 6600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Trackfish 6600

Navman Trackfish 6600 User Manual - German - 76 pages

Navman Trackfish 6600 User Manual - Dutch - 81 pages

Navman Trackfish 6600 User Manual - Italian - 81 pages

Navman Trackfish 6600 User Manual - Swedish - 78 pages

Navman Trackfish 6600 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info