512557

Navman Trackfish 6600 Manual

28
Zoom out
Zoom in
Previous page
1/83
Next page
TRACKFISH 6600 Installation and Operation Manual 29
NAVMAN
ii Press MENU and select Move.
iii Move the cursor to where the waypoint
will be.
iv Press ENTER.
7 To remove a waypoint from the route:
i Move the cursor to the waypoint to
remove from the route.
ii Press MENU and select Remove. The
waypoint is removed from the route,
but the waypoint is not deleted.
8 Repeat this process until the route is
fi nished. Review the route and check
that the route does not cross land or
dangerous water.
Then press ESC.
Or, to delete the route that is being created:
i Press MENU and select Delete.
ii Select Yes to confi rm.
Tip: The distance and bearing calculator can
also be used to enter a course and save it as a
route (see section 3-3).
B. Creating a new route from the routes
display
1 In the routes display, press MENU and
select Create.
2 A new route, with a default name and no
waypoints, is displayed.
3 To change the route name:
i Select the route name at the top of the
display and press ENTER.
ii Change the name if necessary.
iii Press ENTER.
4 To insert a waypoint in the route:
i Select where the waypoint will be:
To insert the fi rst waypoint in a
new route, select Leg 1.
To insert a waypoint at the end of
the route, select the unused leg at
the end of the list of waypoints.
Otherwise, select the waypoint to
insert the new waypoint in front of.
ii Press ENTER. A list of waypoints is
displayed. Select the waypoint to use.
As waypoints are inserted, the distance
and bearing of each leg is shown
automatically. If the route has more
waypoints than will fi t on the display,
press
or to see them.
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press MENU and select Remove.
6 Repeat this process until the route is
fi nished.
7 Press ESC.
8 Display the route on the chart (see
section 6-2-3) and check that the route
does not cross land or dangerous water.
6-2-2 Editing a route
Editing a route from the chart
1 In the routes display, select the route to
edit. Press MENU and select Edit on
chart.
2 The selected route is displayed on
the chart, with a circle around the fi rst
waypoint.
3 Edit the route as described in section 6-2-
1 A, starting at step 4.
Editing a route from the routes display
1 In the routes display, press
or to
highlight the route to edit. Press MENU
and select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 6-2-
1 B, starting at step 3.
6-2-3 Displaying a route on the
chart
To view the selected route at the centre of
the display:
1 In the routes display, press
or
to highlight the route to display. Press
MENU and select Display.
Or, in the Chart display, press MENU,
select Find, then select Route. Select a
route from the list.
2 The TRACKFISH displays the selected
route on the chart.
6-2-4 Deleting a route
1 In the routes display, press or to
highlight the route to delete. Press MENU
and select Delete.
2 Select Yes to confi rm.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Trackfish 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Trackfish 6600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Trackfish 6600

Navman Trackfish 6600 User Manual - German - 76 pages

Navman Trackfish 6600 User Manual - Dutch - 81 pages

Navman Trackfish 6600 User Manual - Italian - 81 pages

Navman Trackfish 6600 User Manual - Swedish - 78 pages

Navman Trackfish 6600 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info