512557
25
Zoom out
Zoom in
Previous page
1/83
Next page
TRACKFISH 6600 Installation and Operation Manual26
NAVMAN
Warning: Do not create a navigation
waypoint on land or in dangerous water.
5-2-1 Creating a new waypoint
Creating a new waypoint from any display
Press
. A new waypoint is created at
the boat position with the default name
and data. To change the default data, see
section 5-2-3.
Creating and editing a new waypoint from
the chart display
1 To create a waypoint at the boat position,
press ESC to switch the chart to centre
on boat mode.
Or, to create a waypoint at a different
point, move the cursor to that point on the
chart.
2 Press MENU and select New waypoint.
3 A new waypoint, with the default name
and data is created.
4 Change the waypoint data if necessary
(see section 5-2-7). Select Save.
Creating a new waypoint from the waypoints
display
1 In the waypoints display, press MENU
and select Create.
2 A new waypoint, with a default name and
data, is created at the boat position.
3 Change the waypoint data if necessary
(see section 5-2-7). Select Save.
Note: Waypoints can also be created when a
route is created (see section 6-2-1).
5-2-2 Moving a waypoint
Moving a waypoint from the chart display
1 In the chart display, move the cursor to
the waypoint to move.
2 Press MENU and select Move.
3 Move the cursor to the new position and
press ENTER.
Moving a waypoint from the waypoints
display
To move a waypoint from the waypoints
display, edit the waypoint (see section 5-2-3)
and change the latitude and longitude.
5-2-3 Editing a waypoint
Editing a waypoint from the chart display
1 In the chart display, move the cursor to
the waypoint to edit.
2 Press MENU and select Edit.
3 Change the waypoint data (see section
5-2-7). Select Save.
Editing a waypoint from the waypoints
display
1 In the waypoints display, press
or
to highlight the waypoint to edit. Press
MENU and select Edit.
2 Change the waypoint data (see section
5-2-7). Select Save.
5-2-4 Displaying a waypoint on
the chart
This goes to the chart display, and shows the
selected waypoint at the centre of the display.
1 In the waypoints display, press or
to highlight the waypoint to display. Press
MENU and select Display.
Or, in the Chart display, press MENU,
select Find, then select Waypoints.
Select a waypoint from the list.
2 The TRACKFISH switches to the chart
display, with the selected waypoint at the
centre of the chart.
5-2-5 Deleting a waypoint
A waypoint can not be deleted if the boat is
navigating to it or if the waypoint is used in more
than one route. A waypoint that is used in one
route can be deleted.
Warning when a waypoint is deleted from
a route, check that the changed route does
not cross land or dangerous waters.
Deleting a waypoint from the chart display
1 In the chart display, move the cursor to
the waypoint to delete.
2 Press MENU and select Delete.
3 Select Yes to con rm.
Deleting a waypoint from the waypoints
display
1 In the waypoints display, press
or
to highlight the waypoint to delete. Press
MENU and select Delete.
2 Select Yes to con rm.
5-2 Managing waypoints
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Trackfish 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Trackfish 6600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Trackfish 6600

Navman Trackfish 6600 User Manual - German - 76 pages

Navman Trackfish 6600 User Manual - Dutch - 81 pages

Navman Trackfish 6600 User Manual - Italian - 81 pages

Navman Trackfish 6600 User Manual - Swedish - 78 pages

Navman Trackfish 6600 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info