512557
17
Zoom out
Zoom in
Previous page
1/83
Next page
TRACKFISH 6600 Installation and Operation Manual18
NAVMAN
3 Navigation: Chart
3-1 Introduction to navigating
The TRACKFISH has two ways of navigating,
going straight to a point or following a route.
Enter waypoints at points of interest before
starting to navigate (see section 5-2-1).
Tip: Create a waypoint at the start of the trip
to navigate back to.
Goto: Going straight to a point
The TRACKFISH can navigate straight to a
waypoint or to any arbitrary point:
1 Switch to the chart display
(see section 2-6).
2 Start navigating using the GOTO/AUTO
key (see section 3-4).
When the TRACKFISH is navigating, the
chart, data and highway displays show
navigation data. The chart shows:
The boat position .
The destination point marked with
a circle.
The boat’s plotted course to the
destination.
Two CDI lines, parallel to the boat’s
plotted course (see Appendix C, CDI).
If the TRACKFISH is connected to an
autopilot, the TRACKFISH will send data
to the autopilot to steer the boat to the
destination. Start the autopilot.
If the XTE alarm is enabled, an alarm will
sound if the boat deviates too much from
its intended course (to set the XTE alarm,
see section 15-8).
3 If the arrival radius alarm is enabled, then,
when the boat comes within the arrival
radius of the destination, an alarm will
sound to show that the boat has reached
the destination (to set the arrival radius
alarm, see section 15-8).
4 To stop the Goto, see section 3-4.
Following a route
A route is a list of waypoints that the boat can
follow (see section 6).
1 To create waypoints before creating the
route, see section 5-2-1.
2 To create a route, see section 6-2-1.
3 To start the route, see sections 3-4 or
6-3-1.
When the TRACKFISH is navigating,the
chart, data and highway displays show
navigation data. The chart shows:
The boat position .
The waypoint at the end of the current
leg marked with a circle.
The boat’s plotted course along the leg.
Two CDI lines, parallel to the boat’s
plotted course (see Appendix C, CDI).
If the TRACKFISH is connected to an
autopilot, the TRACKFISH will send data
to the autopilot to steer the boat to the
destination. Start the autopilot.
If the XTE alarm is enabled, an alarm will
sound if the boat deviates too much from
its intended course (see section 15-8).
If the arrival radius alarm is enabled, then,
when the boat comes within the arrival
radius of the waypoint at the end of the
current leg, an alarm will sound (to set the
arrival radius alarm, see section 15-8).
4 The TRACKFISH stops navigating to the
waypoint at the end of the current leg and
starts the next leg of the route:
a When the boat comes within 0.025 nm
of the waypoint.
b Or when the boat passes the
waypoint.
c Or if the waypoint is skipped (see
section 6-3-2).
5 When the boat has reached the nal
waypoint, or to stop the boat following the
route at any time, cancel the route (see
section 6-3-3).
The chart display shows the chart, the boat’s position course and navigation data. To show the
Chart display, press ESC until the chart is displayed.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Trackfish 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Trackfish 6600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Trackfish 6600

Navman Trackfish 6600 User Manual - German - 76 pages

Navman Trackfish 6600 User Manual - Dutch - 81 pages

Navman Trackfish 6600 User Manual - Italian - 81 pages

Navman Trackfish 6600 User Manual - Swedish - 78 pages

Navman Trackfish 6600 User Manual - Spanish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info