512559
57
Zoom out
Zoom in
Previous page
1/68
Next page
TRACKER 5505/5505i/5605 Installation and Operation Manual
57
NAVMAN
c Enter smartcraft setup data (see the
SmartCraft Gateways Installation and
Operation Manual)
For information on installing, setting up and
using SmartCraft, see the SmartCraft Gateways
Installation and Operation Manual.
15-7 Installation: NAVMAN diesel sensors
Fit the optional diesel fuel kit following the
instructions supplied with the kit.
Note:
Fit one kit per engine, up to two engines.
Wire all diesel flow sensor cables in parallel.
SmartCraft engines have fuel flow sensors,
therefore Navman diesel sensors are not
required as well.
Normally, power the diesel sensors from
the boat ignition switch. Then the TRACKER
does not need to be wired for auto power
(see section 14-4).
Diesel sensor cable
White
The TRACKER can be connected to up to two
SmartCraft capable Mercury petrol/gasoline
engines. The TRACKER can display engine data
and trim and can control troll speed.
Note:
Connect the TRACKER to the SmartCraft
engines with a Navman SmartCraft
gateway:
i For single engine fit a single gateway
ii For dual engines fit a dual gateway
SmartCraft engines have fuel flow sensors,
therefore Navman fuel sensors are not
required as well.
Wire the unit for auto power (see section
15-4).
During setup
a Enter fuel setup data (see section 14-4)
b Set NavBus and SmartCraft to (see section
14-1)
SmartCraft
gateway
15-8 Installation: SmartCraft
White
NavBus is Navman’s system for connecting
instruments together to interchange data
and share transducers. When instruments are
connected by NavBus:
If the units, alarms or calibration are
changed in one instrument, then the values
will automatically change in all other
instruments of the same type.
15-9 Installation: Other NavBus instruments
Each instrument can be assigned to a group
of instruments. If the backlight is changed in
an instrument in group 1, 2, 3 or 4 then the
backlight will automatically change in the
other instruments in the same group.
If the backlight is changed in an instrument
in group 0 then no other instruments are
affected.
During setup
a Enter fuel setup data (see section 14-4)
b Set NavBus to (see section 14-1 setup
system)
57


Need help? Post your question in this forum.

Forumrules
1

Forum

navman-tracker-5605

Reset search

  • How to enter a new route from greenwhich marina altea spain to cabo roig marina spain Submitted on 26-9-2023 at 16:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Tracker 5605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5605 in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5605

Navman Tracker 5605 User Manual - German - 74 pages

Navman Tracker 5605 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info