Manual Navman TRACKER 5600 (page 23 of 42) (English)

512560

Zoom out

Zoom in

1/42

TRACKER 5600 Installation and Operation Manual

NAVMAN

B. Creating a new route from the routes display

1 In the routes display, press MENU and select

Create

2 A new route, with a default name and no

waypoints, is displayed.

3 To change the route name:

i Select the route name at the top of the

display and press ENT.

ii Change the name if necessary.

iii Press ENT.

4 To insert a waypoint in the route:

i Select where the waypoint will be:

To insert the first waypoint in a new

route, select Leg 1.

To insert a waypoint at the end of the

route, select the unused leg at the end

of the list of waypoints.

Otherwise, select the waypoint to insert

the new waypoint in front of.

ii Press ENT. A list of waypoints is displayed.

Select the waypoint to use.

As waypoints are inserted, the distance and

bearing of each leg is shown automatically. If

the route has more waypoints than will fit on

the display, press or to see them.

5 To remove a waypoint from the route:

i Select the waypoint to remove.

ii Press MENU and select

Remove

6 Repeat this process until the route is finished.

7 Press ESC.

8 Display the route on the chart (see section 10-

2-3) and check that the route does not cross

land or dangerous water.

10-2-2 Editing a route

Editing a route from the chart

1 In the routes display, select the route to edit.

Press MENU and select

Edit on chart

2 The selected route is displayed on the chart,

with a circle around the first waypoint.

3 Edit the route as described in section 10-2-1 A,

starting at step 4.

Editing a route from the routes display

1 In the routes display, press

or to

highlight the route to edit. Press MENU and

select

Edit

2 The selected route is displayed: the route

name and a list of the waypoints.

3 Edit the route as described in section 10-2-1 B,

starting at step 3.

10-2-3 Displaying a route on the

chart

To view the selected route at the centre of the

display

1 In the routes display, press

or to

highlight the route to display. Press MENU and

select

Display

2 It returns to the chart display, with the selected

route displayed.

10-2-4 Deleting a route

1 In the routes display, press or to

highlight the route to delete. Press MENU and

select

Delete

2 Select

Yes

to confirm.

10-2-5 Deleting all routes

1 In the routes display, press MENU and select

Delete all

2 Select

Yes

to confirm.

10-3-1 Starting a route

To start the boat navigating along a route:

1 In the routes display, press

or to

highlight the route to use. Press MENU and

select

Start

2 The TRACKER asks for the direction to

traverse the route.

Select

Forward

(the order the route was

created) or

Reverse

3 It displays a chart with the route marked and

starts navigating from the start of the route.

10-3 Navigating a route

10-3-2 Skipping a waypoint in a route

To skip a waypoint when the boat is navigating along

a route:

In the chart display, press MENU and select

Skip

The TRACKER starts navigating straight towards the

next waypoint on the route.

Warning: Skipping a waypoint with the

autopilot on might result in a sudden course

change.

10-3-3 Cancelling a route

To stop the boat navigating along a route:

In the chart display, press MENU and select

Cancel route

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman TRACKER 5600 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman TRACKER 5600

Navman TRACKER 5600 User Manual - German - 43 pages

Navman TRACKER 5600 User Manual - Dutch - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman TRACKER 5600 Manual

Product: