512558

Navman Tracker 5505 Manual

31
Zoom out
Zoom in
Previous page
1/68
Next page
TRACKER 5505/5505i/5605 Installation and Operation Manual
31
NAVMAN
10 Fuel functions and display
The Fuel functions require optional petrol/gasoline, diesel or SmartCraft fuel sensors to be installed
and set up.
Each engine has a flow sensor installed to
measure the engine’s fuel flow.
The TRACKER uses these flows, together with
boat speed and engine RPM if available to
estimate the fuel remaining in the tank(s), fuel
used, range and fuel economy. This data is
displayed on the fuel display (see section 10-2).
You can:
display the fuel used during a trip
(seesection 10-2)
set low fuel alarms (see section 10-4)
make fuel consumption curves - graphs
of fuel consumption and boat speed as a
function of engine RPM - to monitor and
optimise boat performance.
(see section 10-6)
10-2 Fuel display
To go to the Fuel display, press , select
Other, then select Fuel.
The display differs according to the number of
engines and tanks. If engine RPM is available
and if you have made and selected a Fuel
Consumption Curve (see section 10-6), press
to switch between a Summary or a Fuel
curve display.
The Fuel display shows
Speed
To select a boat speed sensor, see section 10-5-1.
RPM (if available)
If engine RPM is not available, the display
shows depth.
Remaining
The fuel remaining in the tank(s) is shown as a
vertical gauge on the right of the display. The
height of the yellow bar(s) show how much fuel
remains in the tank(s). If you have set a low fuel
alarm (see section 10-4), a red bar shows the
level at which the alarm will trigger. If there are
two tanks, the left bar shows the port tank, the
right bar shows the starboard tank.
10-1 What the fuel computer does
Used
The fuel used during a trip. On a multi-engine
boat, the data for the port engine is on the left
of the display.
When you want to start measuring how much
fuel is used, go to the Fuel display and:
In a single engine boat, press and
select Clear used.
In a multi-engine boat, the fuel used by
each engine and the total fuel used are
shown. Press , select Clear used
and select:
Port or Starboard to clear the fuel used
by one engine
Both to clear the total fuel used.
Fuel flow
The fuel flow for the engine(s). On a multi
engine boat, the data for the port engine is on
the left of the display. Use the flows to check
the load of each engine.
CAUTION
!
!
CAUTION
DANGER
WARNING
To ensure the fuel data is accurate:
When you add or remove fuel from a
tank, tell the TRACKER (see section 10-3)
If the boat has petrol/gasoline sensors,
calibrate them during installation or if
the fuel readings seem inaccurate (see
section 10-7)
Choose an appropriate type of boat
speed sensor to calculate economy,
range and the fuel consumption curve
(see section 10-5)
If the boat uses a paddlewheel sensor
to measure speed, calibrate it during
installation or if the speed readings
seem inaccurate.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Tracker 5505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5505 in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5505

Navman Tracker 5505 User Manual - German - 74 pages

Navman Tracker 5505 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info