Manual Navman Tracker 5500i (page 22 of 42) (English)

512562

Zoom out

Zoom in

1/42

TRACKER 5100/5100i/5500/5500i Installation and Operation Manual

NAVMAN

Warning: After creating or changing a route,

display the route on the chart and check that it

does not cross land or dangerous water.

10-2-1 Creating a new route

A. Creating a new route from the chart display

While creating the route:

Press or to change the range; scroll the

chart by moving the cursor to the edge of the

chart.

A data box at the top, left of the display shows

the route name and total distance. If the cursor

is near a leg, it shows the length and bearing

of the leg as well.

The legs of a route must start and end at

waypoints. If a leg does not start or end at an

existing waypoint then a new waypoint will be

created automatically (to change the new

waypoint data, see section 9-2-7).

1 In the chart display, press MENU and select

New route.

2 The route is given a default name:

i Change the name if necessary.

ii Select Ok.

3 To enter the first leg of the route:

i Move the cursor to the start of the route

and press ENT.

ii Move the cursor to the end of the first leg

and press ENT.

4 To add a waypoint at the end of the route:

i Press ENT.

ii Move the cursor to where the new route

waypoint will be.

iii Press ENT.

5 To insert a waypoint in the route:

i Move the cursor to the chosen leg to insert

the waypoint.

ii Press MENU and select Insert.

iii Move the cursor to where the new route

waypoint will be.

iv Press ENT.

6 To move a waypoint in the route:

i Move the cursor to the waypoint to move.

ii Press MENU and select Move.

iii Move the cursor to where the waypoint will be.

iv Press ENT.

7 To remove a waypoint from the route:

i Move the cursor to the waypoint to remove

from the route.

ii Press MENU and select Remove. The

waypoint is removed from the route, but the

waypoint is not deleted.

8 Repeat this process until the route is finished.

Review the route and check that the route does

not cross land or dangerous water.

Then press ESC.

Or, to delete the route that is being created:

i Press MENU and select Delete.

ii Select Yes to confirm.

Tip: The distance and bearing calculator can also

be used to enter a course and save it as a route (see

section 3-2).

10 Routes

10-2 Managing routes

A route is a list of waypoints that the boat can navigate

along. Routes can be created, changed and deleted.

The TRACKER can have up to 25 routes. Each route

can have up to 50 waypoints. A route can:

Start and stop at the same waypoint .

Include waypoints more than once.

The TRACKER can navigate along a route in either

direction. Waypoints on the route can be skipped.

Routes are a powerful feature when the TRACKER

is connected to an autopilot, allowing the vessel to

be automatically guided along the route.

Warning: Make sure that routes do not cross

land or dangerous water.

10-1 Routes display

The routes display is a list of the routes that have

been entered, each with route name, start waypoint,

end waypoint, number of legs and total distance.

To go to the routes display, press DISP and select

Routes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5500i in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5500i

Navman Tracker 5500i User Manual - German - 43 pages

Navman Tracker 5500i User Manual - Dutch - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman Tracker 5500i Manual

Product: