512566
32
Zoom out
Zoom in
Previous page
1/44
Next page
32
TRACKER 5430/5430i Installation and Operation Manual
NAVMAN
13-7 Alarms setup
XTE alarm
When the XTE alarm is enabled, an alarm will
sound when the boat is navigating to a point
and the distance from the boat to the plotted
course (XTE) is more than CDI (Course Deviation
Indicator) scale (see appendix C, CDI).
To enable the alarm, set the XTE alarm to On.
To disable the alarm, set the XTE alarm to Off.
Danger alarm
When the danger alarm is enabled, an alarm will
sound when the boat comes within this distance
of a danger waypoint.
To enable the alarm, enter an danger alarm
distance (up to 9.99 distance units).
To disable the alarm, set the danger alarm to
Off (0).
Low fuel alarm
When the low fuel alarm is enabled, an alarm will
sound when the fuel remaining in the tank is less
than the low fuel value.
To enable the alarm, enter a low fuel value.
To disable the alarm, set the low fuel value
to Off.
DGPS alarm
When the DGPS alarm is enabled, an alarm will
sound when the TRACKER can not receive the
DGPS signal (beacon, WAAS or EGNOS)
For alarm operation, see section 2-5. To turn off
an alarm which is sounding, press ESC.
Arrival radius alarm
When the arrival radius alarm is enabled, an
alarm will sound:
a When the boat is going to a point and the
boat comes within the arrival radius of the
destination.
b Or when the boat is navigating a route and
the boat comes within the arrival radius of a
waypoint in the route.
To enable the alarm, enter an arrival radius
(up to 9.99 distance units).
To disable the alarm, set the arrival radius
to Off (0).
Anchor alarm
When the anchor alarm is enabled, an alarm will
sound when the boat moves by more than the
anchor alarm distance.
To enable the alarm, enter an anchor alarm
distance (up to 9.99 distance units). The
TRACKER saves the current boat position.
To disable the alarm, set the anchor alarm
to Off (0).
The minimum usable setting of the alarm
is determined by the accuracy of the global
positioning system, typically within 10 m (33 ft).
Warning: Do not rely on the anchor alarm
as the only anchor watch.
The values can be changed independently of
each other. These log values are saved when the
unit is turned off.
The TRACKER has two distance logs.
Trip distance:
The distance travelled since log was reset.
Total distance:
The distance travelled since total log was reset.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
13-6 Logs setup
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Tracker 5430i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5430i in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5430i

Navman Tracker 5430i User Manual - German - 45 pages

Navman Tracker 5430i User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info